^ Take it to a bloody mechanic. no one will know for sure what the problem is unless they physically inspect it. if your mechanic doesn't know then take it elsewhere till someone solves it, mate. no point on asking here on a forum when nobody is going to physically inspect it.
Im just sayin'.
hey mate just letting you know i done the same thing with my car.. put cams in and the idle used to go up and down than just dye on me.. the problem was theres 2 marks on the crank pulley i had put the timing belt on the wrong way which made it too advanced so just check your top dead centre by pulling out the first plug closest to your timing belt put a long screw driver in make sure piston is at the top than check the marks on the cam gears.. hope that makes sense cause that fixed my problem for me and i was using skunk2 pro 1
hey mate just letting you know i done the same thing with my car.. put cams in and the idle used to go up and down than just dye on me.. the problem was theres 2 marks on the crank pulley i had put the timing belt on the wrong way which made it too advanced so just check your top dead centre by pulling out the first plug closest to your timing belt put a long screw driver in make sure piston is at the top than check the marks on the cam gears.. hope that makes sense cause that fixed my problem for me and i was using skunk2 pro 1
Bookmarks