| 
		
		
	 
	
	
		
			
	
		
			
				
					25-05-2012 12:52 PM
				
			
			
				
					#12793
				
				
				
			
		
	 
		
		
			
				
				
						
							
							
						
						
				
					
						
							
	could be rust, and/or warped plastic.
		
			
			
				
					  Originally Posted by UNA91   Anyone find their recaros squeaky when going over bump/bumpy roads? Mine squeaks and clicks, not very obvious but knowing its there just drives me nuts haha. Also my drivers side seat hip bolsters feel really loose, not the actual foam but the plastic. I could wiggle it back and forth. The same as the rails on my seats 
	
		
			
				
					25-05-2012 01:10 PM
				
			
			
				
					#12794
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	Pretty sure OEM bulbs are D2R.
		
			
			
				
					  Originally Posted by Icebox   Anyone know whats the bulb used for the projector headlights? my front left headlight doesnt work no more~ i assume its the bulb but the alarm systems wired though to the same headlight, and normally it should be wired to the parkers instead 
	
		
			
				
					25-05-2012 02:51 PM
				
			
			
				
					#12795
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	are the D2Rs the same ones that go into the facelift ones ? just wanna make sure before i DIY
		
			
			
				
					  Originally Posted by Symphorced   Pretty sure OEM bulbs are D2R. 
	
		
			
				
					25-05-2012 03:55 PM
				
			
			
				
					#12796
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	good to know you like it.
		
			
			
				
					  Originally Posted by JDM EP3   Mine are fine and didnt do anything like you describe, although I have now changed to a vanner tunner special ultra low seat rail, feels great sitting so low and being able to dump the steering wheel even lower and have a clear view of the cluster. 
	
		
			
				
					25-05-2012 04:02 PM
				
			
			
				
					#12797
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	Tegiwa sells the silicone intake pipes. (Should have told me earlier, I could have ordered one with your other part).
		
			
			
				
					  Originally Posted by JDM EP3   Good info man looked at xposed and the price is slightly better for the gruppeM from there will be getting mine soon now, btw anyone know what brands or where to get the silicone hoses for the ep3 intake? 
 Again +1 for Jesse Streeter, I got my gruppe m through him and saved well over $300compared to the cheapest local price. Shipped via ems too.
 
 
 
	Nice
		
			
			
				
					  Originally Posted by JDM EP3   Mine are fine and didnt do anything like you describe, although I have now changed to a vanner tunner special ultra low seat rail, feels great sitting so low and being able to dump the steering wheel even lower and have a clear view of the cluster.   
	
		
			
				
					25-05-2012 04:17 PM
				
			
			
				
					#12798
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	Yeah I should have ordered it at the time, oh well, also with the gruppeM I have seen them on xposed for $931, how much did you pay for yours again?
		
			
			
				
					  Originally Posted by RPS.13   Tegiwa sells the silicone intake pipes. (Should have told me earlier, I could have ordered one with your other part).
 Again +1 for Jesse Streeter, I got my gruppe m through him and saved well over $300compared to the cheapest local price. Shipped via ems too.
 
				
				
				
					
						Last edited by JDM EP3; 25-05-2012 at 04:22 PM.
					
					
				 AKA: The Spaniard!  +1 Rep me if you find my posts useful.  
 
	
		
			
				
					25-05-2012 04:26 PM
				
			
			
				
					#12799
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	thanks man
		
			
			
				
					  Originally Posted by Philip Lee   good to know you like it.   
				
                                       
                                 
				
		        		AKA: The Spaniard!  +1 Rep me if you find my posts useful.  
 
	
		
			
				
					25-05-2012 05:01 PM
				
			
			
				
					#12800
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							eeek! 1k for an intake :s 
 thats some moola
 
	
		
			
				
					25-05-2012 05:34 PM
				
			
			
				
					#12801
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	hmm, i took the seat out and wiggled it abit and found the sound to be coming from around the lever to fold the seats down, oiled it all up but still makes noise. I sort of sounds like shaking a white out pen with those metal things inside them lol Don't really wanna take it apart cause i'm scared i'd mess something up lol
		
			
			
				
					  Originally Posted by JDM EP3   Mine are fine and didnt do anything like you describe, although I have now changed to a vanner tunner special ultra low seat rail, feels great sitting so low and being able to dump the steering wheel even lower and have a clear view of the cluster. 
				
                                       
                                 
				
		        		vtak + jrsc = bwwaaaahinneeeeeIF GUNS don't kill people , people kill people  does that mean that toasters don't toast toast, toast toast toast?  
 
	
		
			
				
					25-05-2012 05:48 PM
				
			
			
				
					#12802
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	Will end up cheaper if you go through Streeter! Also, many people (including myself) use SFS intake pipes. Doubt there's too much difference in which brand of silicon piping you use though!
		
			
			
				
					  Originally Posted by JDM EP3   Yeah I should have ordered it at the time, oh well, also with the gruppeM I have seen them on xposed for $931, how much did you pay for yours again? 
	
		
			
				
					25-05-2012 05:53 PM
				
			
			
				
					#12803
				
				
				
			
		
	 
		
		
			
				
				
						
						
				
					
						
							
	Where can I get the sfs hose from? Checked here online and the trader is expired but had it for $20!
		
			
			
				
					  Originally Posted by Symphorced   Will end up cheaper if you go through Streeter! Also, many people (including myself) use SFS intake pipes. Doubt there's too much difference in which brand of silicon piping you use though! 
				
                                       
                                 
				
		        		AKA: The Spaniard!  +1 Rep me if you find my posts useful.  
 
	
		
			
				
					25-05-2012 06:59 PM
				
			
			
				
					#12804
				
				
				
			
		
	 
		
		
			
				
				
						
						
							
						
				
					
						
							
	yeh rps said it, tegiwa makes one.
		
			
			
				
					  Originally Posted by JDM EP3   Good info man looked at xposed and the price is slightly better for the gruppeM from there will be getting mine soon now, btw anyone know what brands or where to get the silicone hoses for the ep3 intake? Gruppe m might have one.. they used to.. dunno bout now.
 
 also, ive seen on the uk type r forums the SFS silicon hose is really popular for the gruppe and it fits really snug too
 
 
 
	where do you buy low seat rails for the oem ep3 recaros from?
		
			
			
				
					  Originally Posted by JDM EP3   Mine are fine and didnt do anything like you describe, although I have now changed to a vanner tunner special ultra low seat rail, feels great sitting so low and being able to dump the steering wheel even lower and have a clear view of the cluster. 
 
	
	
 
	
	
	
	
	
	
	Tags for this Thread
		
		
		
		
			
				 Posting Permissions
				
	
		You may not post new threadsYou may not post repliesYou may not post attachmentsYou may not edit your posts  Forum Rules | 
Bookmarks