EG6 NON-SRS steering wheel not fit?FIXED!!!!!

[altong0840]

i recently tried to replace the SRS steering wheel for my DC4
i undo the steering wheel and tried to put the EG6 EG6 NON-SRS MOMO steering wheel but the hole of the teeth is very very loose, not even fit,

isn't that EG steering wheel should fit DC?


very very big question mark????





finally, i giveup with the factory steering and go for this one!



thanks for the help!!!!!!!!!!!!!!

[infurNOS]

I think you need a civic steering column.

[altong0840]

I think you need a civic steering column.

but isn't dc2r steering wheel can fit eg? so it should also interchange between eg and dc?

[infurNOS]

Well it should because it is the same hub, disregard my first post. So i dont see why yours is not fitting...

[dorikin]

EG and DC should be interchangeable

Take a photo and measurement of your DC4 steering column, I want to see it

[altong0840]

the steering column is way too small and the diameter of the hole of the steering wheel is 2mm larger than the column.

[dorikin]

Give me the actual measurement (diameter) of the spline on the column so I can tell you what the problem is.