ITR engine loom is also OBD2. you need CRX (EG2) engine loom or eg6 engine loom which is OBD1. Any rear bracket from either a crx del sol or any dc integra will work. You do not need a tunable setup. You can use a stock P30 (EG6/EG2) ECU. DC2 shift linkages will work.
IMO You are better off finding a OBD1 B18C2 DC2 halfcut OR wrecked dc2 which will have absolutely everything you need, brake swap and all for a direct swap into your eg.
Reply With Quote
Bookmarks