QLD mod plates and max engine increase

[IVTECI]

QLD transport "approved inspectors" are generally safety/roadworthy certificate issuers, you may find some that do mod plates but very rarely, Mod platers are usually 'Free Lancers' and is something they do in their part time or companies that specifically do mod plates.

For example, here is a quick search i did, and this is what came up:
http://www.hotfrog.com.au/Companies/DB-Autotech

There are other ones, so its best to shop around, some will try to screw you by saying one mod per plate, but u can get some that put 4 mods per plate etc. The guy that did mine was a free lancer and he said he'll put as many as he can on the one plate, and cost me bout $80, but unfortunately, My iphone was stolen when i was in thailand, and i lost his number... Look around and just ask them when you get your quotes and make sure that they will give you the modification certificate/papers, because when you go to QLD transport, showng them a mod plate is no good, you need to show them the papers. Good luck wit it all!

Thanks champ, ill ring around,

There used to be a workshop in burleigh heads that did all and on the spot. They did check the usual white slip requirements just like pink slips jn syd. But he was kool mod plating my old beast.

Are there any types of mods that cant be mod plated? I knw there are some but cant recall.

So do u think a ek civic with a kswap will pass? All work is done correctly.

[84AAP]

Thanks champ, ill ring around,

There used to be a workshop in burleigh heads that did all and on the spot. They did check the usual white slip requirements just like pink slips jn syd. But he was kool mod plating my old beast.

Are there any types of mods that cant be mod plated? I knw there are some but cant recall.

So do u think a ek civic with a kswap will pass? All work is done correctly.

Yeah should be alrite, as long as the engine has been put in properly u shouldnt have a problem, but as far as i know, u can modplate just about anything, u will have to find out in detail though from someone more experienced, I dont know too much in that field. All the best! Hope my wisdom has helped you...

[IVTECI]

Yeah should be alrite, as long as the engine has been put in properly u shouldnt have a problem, but as far as i know, u can modplate just about anything, u will have to find out in detail though from someone more experienced, I dont know too much in that field. All the best! Hope my wisdom has helped you...

Yeh thanks for the help +1.

If u find the number or the name of that mobile dude let me knw.

Forgot to ask- is there such thing as engineers cert in qld like what they have in syd or the mod plate papers are the equivalent?

[84AAP]

Yeh thanks for the help +1.

If u find the number or the name of that mobile dude let me knw.

Forgot to ask- is there such thing as engineers cert in qld like what they have in syd or the mod plate papers are the equivalent?

No engineers cert. in QLD. Mod papers are the equivalent.

[IVTECI]

No engineers cert. in QLD. Mod papers are the equivalent.

champion!

+1 - You must spread some Reputation around before giving it to 84AAP again. fuuuuuuuuuuuuuu!! LOL

if you do find the mobs number or company name let me know champ!

cheers!

[IVTECI]

Spoke to a TMR light vehicle officer who said i just need the LA1 code for me k motor!! He even said i shouldnt any have issues.

[84AAP]

yeah man, there is only codes on a modplate, i got bout 4 codes on mine. Duno what the codes stand for tho.

[IVTECI]

here is the current MOD Plate codes

LIGHT VEHICLE MODIFICATION CODES FOR APPROVED PERSONS

CODE MODIFICATION
LA1 Engine Substitution
LA3 Turbocharger and Supercharger Installation
LB1 Transmission Substitution
LD1 Rear Axle Replacement
LD2 Differential Substitution
LG1 Brake System Substitution (Design)
LG2 Brake System Substitution (Modification)
LH1 Convertible and Cabriolet Conversion (Design)
LH2 Convertible and Cabriolet Conversion (Modification)
LH3 Passenger Vehicle Extended Wheelbase Conversion (Design)
LH4 Passenger Vehicle Extended Wheelbase Conversion (Modification)
LH5 Individual and Low Volume Vehicles (Design)
LH6 Individual and Low Volume Vehicles (Modification)
LH7 Panel Van to Utility Conversion
LH8 Roll Bar and Roll Cage Installation
LH9 Street Rod Certification (Concessional Registration)
LH10 Street Rod Certification (Unrestricted Registration)
LK1 Seating Capacity Alteration and Seat Belt Installation
LK2 Seat, Seat Anchorage and Seat Belt Anchorage Certification
LK6 Child Restraint Anchorage Installation
LK7 Motorcycle Seating Capacity Alteration
LM1 Fuel Tank Alteration
LO1 Australian Design Rule (ADR) Compliance
LO2 Pre 1972 Imported Vehicle Safety Compliance
LO3 Personally Imported Vehicle Compliance
LS1 Steering Conversion (Design)
LS2 Steering Conversion (Modification)
LT1 Beaming and Torsional Testing






apparently i need LA1 - option 2 for kswap codes.

[84AAP]

+1 thats awesome!

[GSi_PSi]

say you had your K swap modplated and registered (QLD) and were then to tranfer the registration to nsw, would the engine still be registered as a 2.0L or 2.4 , say it originally had a B16a?

very curious to this one

[IVTECI]

say you had your K swap modplated and registered (QLD) and were then to tranfer the registration to nsw, would the engine still be registered as a 2.0L or 2.4 , say it originally had a B16a?

very curious to this one

if the new engine was registered in QLD and then you transfer to NSW, then RTA will have the new engine number recorded in their database as well as written on the RTA rego papers.

But there is still that risk of being defected by not having an engineers certificate in NSW - as the MOD plates are only valid if the vehicle was registered /operated on QLD roads.

[84AAP]

By the way, i found the number of the guy that did my modplate, His details below, he will fit as many mods as he can on a single plate.

Name: Andrew
Working Area: Brisbane, QLD
Price: $80-$100 (depends on where you live, price may of went up now, call and get a quote)
Number: 0402 293 256