EP3 Type R

[UNA91]

thanks for the info..
dont need to spend money on brake pads and rotors just yet!

unfortunately, i have no idea how to take it apart and putting back together...

Try this: http://forums.clubrsx.com/showthread.php?t=643475

It's for the DC5 but its pretty much the same with the EP3 and most other cars.

Basically, jack car up, take wheel off, remove two bolts and it should come off. Putting it back is just reverse. Hardest part is just getting those bolts off, may help to turn your wheel to one side. Make sure when you assemble it back, that those bolts are tightened to specs (or just really tight...)

Oh and you shouldn't need to push the piston back in unless your changing your pads.

[TonyxTony]

There are some weird cracking sound coming from my engine bay at low speed. usually happens when the car is still then begin to move. not sure where it is coming from :/ everything feels the same

Also which brand of engine mount you guys recommend? Mugen at $500 or J racing at $520 (jdmconcept) price

Thanks alot!

[bluey45]

There are some weird cracking sound coming from my engine bay at low speed. usually happens when the car is still then begin to move. not sure where it is coming from :/ everything feels the same

Also which brand of engine mount you guys recommend? Mugen at $500 or J racing at $520 (jdmconcept) price

Thanks alot!

Well I'm using the mugen engine mounts and I find that they are pretty good. You can order them from rhd japan for about $300.

[JDM EP3]

There are some weird cracking sound coming from my engine bay at low speed. usually happens when the car is still then begin to move. not sure where it is coming from :/ everything feels the same

Also which brand of engine mount you guys recommend? Mugen at $500 or J racing at $520 (jdmconcept) price

Thanks alot!

sounds once again like the steering rack needs regreasing. Also you can get hasport mounts for that price and they are firmer mugen is just a little firmer than stock and not worth it IMHO

[bluey45]

sounds once again like the steering rack needs regreasing. Also you can get hasport mounts for that price and they are firmer mugen is just a little firmer than stock and not worth it IMHO

Depends how firm you want them lol.

[UNA91]

There are some weird cracking sound coming from my engine bay at low speed. usually happens when the car is still then begin to move. not sure where it is coming from :/ everything feels the same

Also which brand of engine mount you guys recommend? Mugen at $500 or J racing at $520 (jdmconcept) price

Thanks alot!

Posted the exact same problem a few pages back; turned out it was the steering rack needed re-greasing.

As for mounts, apparently mugen is meant to feel like oem mounts :S

[TonyxTony]

Posted the exact same problem a few pages back; turned out it was the steering rack needed re-greasing.

As for mounts, apparently mugen is meant to feel like oem mounts :S

Oh Thanks for that, I will try re greasing it.... but how ?? not really sure...

[JDM EP3]

Oh Thanks for that, I will try re greasing it.... but how ?? not really sure...

Info is in here: http://www.ozhonda.com/forum/showthr...-steering-rack

[TonyxTony]

Info is in here: http://www.ozhonda.com/forum/showthr...-steering-rack

thanks bro, and what type of greaser do i need to get? it is a common thing at like auto super or something ?

[JDM EP3]

thanks bro, and what type of greaser do i need to get? it is a common thing at like auto super or something ?

White lithium grease is what is used to grease it up just make sire u get it right in there and turn your wheels side to side and apply allround then use a zip tie or a hose clamp to seal it all up again.

[JDM EP3]

just wanted to ask guys if this is the correct O2 sensor for the EP3? http://www.amazon.com/dp/B000C5WCLS/...0_pd_re_dt_dt2
Would it be recommended to replace the secondary O2 sensor at the same time?

[Lukezen27]

just wanted to ask guys if this is the correct O2 sensor for the EP3? http://www.amazon.com/dp/B000C5WCLS/...0_pd_re_dt_dt2
Would it be recommended to replace the secondary O2 sensor at the same time?

Na secondary doesn't seem to brake much