Results 1 to 4 of 4
  1. #1
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    OGK24A

    Rear clunking noise

    Hey guys,
    Just recently I have been hearing clunking/hollow metal sounds coming from the rear every time I reverse out of my driveway or going over small bumps.
    Currently running 22mm rsb, asr, hardrace bushes + endlinks on stock lcas.
    Have checked the bushes and they are fine. What do you guys think is the problem

    Cheers
    4dr♥

  2. #2
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    Sounds like a loose bolt somewhere
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  3. #3
    Quote Originally Posted by stndrd View Post
    Sounds like a loose bolt somewhere
    Most likely end links loose ?! As stated above - recheck all tightening on all associated nuts and bolts
    To do directly with the swaybar.


    Remember to torque the swaybar ( and suspension in general) with the control arms on a static preloaded level.

    IE tighten the control arm bolts with the car on a flat level of possible

  4. #4
    Member Array
    Join Date
    Apr 2010
    Location
    Sydney
    Car:
    OGK24A
    Found the problem..
    it was the rays lug nuts loosening up so be careful people!
    4dr♥

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.