How much camber out of Ingalls camber bolts for dc5???

[HauLe_]

i dont either or camber bolts for that matter. my set up is exactly like his buddyclub n+ and hardrace rear camber arms thats it

[type_AHH]

hey i have buddyclub n+ coilovers in my dc5r, and i was wondering how much camber i can get out of the ingalls camber bolts so that i can fit my wheels, i dont have camber tops on the coilovers and i have hardrace camber arms on the rear. thanks

Are you talking about the fronts? According to here, both the 14mm and 16mm (which to get will depend on your VIN) front camber bolts will give you +/- 1 degree, assuming you're using one pair:
14mm http://www.kseriesparts.com/cr/ING-81260.html
16mm http://www.kseriesparts.com/cr/ING-81280.html

ive got buddyclub n+ and my fronts have -3 camber

i dont either or camber bolts for that matter. my set up is exactly like his buddyclub n+ and hardrace rear camber arms thats it

Not calling you a liar or anything , but how are you getting -3 degrees at the front without camber tops nor bolts?

[DakDak]

Are you talking about the fronts? According to here, both the 14mm and 16mm (which to get will depend on your VIN) front camber bolts will give you +/- 1 degree, assuming you're using one pair:
14mm http://www.kseriesparts.com/cr/ING-81260.html
16mm http://www.kseriesparts.com/cr/ING-81280.html






Not calling you a liar or anything , but how are you getting -3 degrees at the front without camber tops nor bolts?

Nah his right I just remembered if you go very low you will have natural camber. The lower the more camber, you just have no control over it.