By adjustment do you mean you've removed as much negative camber as possible?
as much as i wanted to. from memory rear camber is approx -0.4 and front camber is -0.8.. can probably get fronts to 0 and rears to +3 with remaining adjustment...
Building for Boost! http://www.ozhonda.com/forum/showthr...87#post3505687
Makes sense, might look into camber kits after I get my ground controls. Being that low, did you have to modify the guards? Or just remove the plastic liner on the inside?
I haven't had to do either. Oh n btw for anyone who's interested. finally started my build thread: http://www.ozhonda.com/forum/showthr...87#post3505687
Hey guys, im after a quick answer, has any used or seen a DC2 Gen 1 mugen exhaust mounted on a DA? Im after something similar to this What do you guys think? Im just worried that it will have to hang too low in order to clear the right side of the muffler. All input appreciated.
Last edited by FoodTray; 05-08-2012 at 04:00 PM.
im running the RS-R and we welded custom mounts to fit up nice and tight no worries just wont be able to take it off anytime quickly if i have too :-S
DA9 B18c2 http://www.facebook.com/RisingSunBaseJumping Base Jumping & Wingsuit Flying is my LIFE
Originally Posted by Latino CRX im running the RS-R and we welded custom mounts to fit up nice and tight no worries just wont be able to take it off anytime quickly if i have too :-S hope you don't mind me asking what model rs-r you are using? and what car was it for?
Damm, havnt been on here in a while, in the Suby world :P whats new in the teg world? I've got a built b18a1 head if anyone still wants haha
Build Thread http://www.ozhonda.com/forum/showthread.php?t=128210 RIP 1992 Horizon Grey DA9 Current 1991 JDM Burgundy DA6, with 108kw atw B18A1
hmm much want, but probs cant afford atm.. just out of curiosity how much?
Originally Posted by FoodTray hope you don't mind me asking what model rs-r you are using? and what car was it for? the same twin tip as the picture .. in mornin i will take some pics of the pipe work and brackets and weldings .. its on a DA9
Originally Posted by Latino CRX the same twin tip as the picture .. in mornin i will take some pics of the pipe work and brackets and weldings .. its on a DA9 That would be great, appreciate it
price i paid .... TOO MUCH ..
Forum Rules
Reply With Quote
Originally Posted by Latino CRX
..
Bookmarks