Results 1 to 12 of 24

Hybrid View

  1. #1
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    how many MM are your sleeves ..


    are you sure it adds up to 2L

    as you would need to jump from 81mm to 87mm bore for 2L capacity

    81mm bore and 87mm stroke = 1.8L


  2. #2
    Newcomer Array
    Join Date
    Jul 2010
    Location
    Penrith NSW
    Car:
    integra Dc2
    yeah 85 mm bore 87.2mm B18C stroke (That gives 1979cc with these pistons)

  3. #3
    Member Array
    Join Date
    May 2009
    Location
    Cranbourne West
    Car:
    DA9 Integra
    Quote Originally Posted by Sideburns1 View Post
    yeah 85 mm bore 87.2mm B18C stroke (That gives 1979cc with these pistons)
    What head flow figures ?
    What size are your throttle bodies ?
    I don't think 170 Kw will be possible with this set up sorry ! Possibly 140kw - 145kw

    Use Of E85
    While is copes quite well with the compression ratio, there appears to be no other benefit, unless you had a turbo engine.
    However on the down side, it uses a massive amount of fuel compared to conventional fuels, this means larger fuel lines, pressure reg etc. The blow by has a strong tendency to dilute the engine oil. The fuel being an alcohol type is hygroscopic in that it absorbs moisture. You can end up with a catch can that distils its own alcohol in it. Also like Methanol the car can be hard to start cold. While V8 tourers use the fuel they do so for more political reasons.
    Cheers
    Last edited by gbpracing; 10-08-2012 at 08:15 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.