Lets Talk d-series

[rpm boy]

Thanks boys , no a friend of mines box has just given up and he asked if he could put my old eg6 auto box on his eg d series(also auto), just had to make sure if it fit which I didnt think it would bolt on so all good, thanks for the info guys

[NelsonLSY]

the gear ratio of the eg vti is extra long....especially the third gear...
any d series gearbox could fit but with a shorter gear ratio?

[markismaximus]

the gear ratio of the eg vti is extra long....especially the third gear...
any d series gearbox could fit but with a shorter gear ratio?

you don't know what you are talking about, the AUDM EG breeze, Gli and VTi all had the same gear ratios for 1st, 2nd, and 3rd. The VTi box has a shorter 4th and 5th gear

[d-series-Mike]

[QUOTE=markismaximus;3471079]you don't know what you are talking about QUOTE]


Depends where nelsonLSY is from mate, i had a jdm vti in the uk with a d15b vtec, s20 gearbox, 3rd gear would hit the jdm limiter of 112mph @approx 4500rpm, it was crazy long, me and my mates thought it was friggin hilarious ha

[markismaximus]

Depends where nelsonLSY is from mate, i had a jdm vti in the uk with a d15b vtec, s20 gearbox, 3rd gear would hit the jdm limiter of 112mph @approx 4500rpm, it was crazy long, me and my mates thought it was friggin hilarious ha

given this is OZHONDA (an Australian forum) unless otherwise specified most people would assume he is living in Australia...

[~Sp33~]

i had a jdm vti....3rd gear would hit the jdm limiter of 112mph @approx 4500rpm, it was crazy long.....

Cool story bro.

[hitoriko]

Hey guys

just abit OffTopic:

What would be the lowest safe oil pressure for a d16a8 engine i've googles and checked a few other forums but have yet to find my answer.

cheers

[~Sp33~]

At what RPM?

Why do you need to know?

[ouch]

anyone know where the thermoswitch is on my ed6?

[dougie_504]

Thermostat?

Probably at the back of the engine, left side, down low.

[hitoriko]

At what RPM?

Why do you need to know?

Im fitting gauges with a warning fuction and just want to set it up

[hitoriko]

anyone know where the thermoswitch is on my ed6?

thermo swich is on the side of the head there should be 2 switches a white and a green (from memory) white is the one that turns your fan on and off and the green is the one that shows the temp on your gauge

i hope that helps