Page 1 of 2 12 LastLast
Results 1 to 12 of 15
  1. #1

    Manual To Electric side mirrors

    Has anyone done this Before? I want to do it on my CXI EK Hatch, My crashed Ek sedan Has power side mirrors.

  2. #2
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    pull the dash out and swap the dash loom and add the door looms

  3. #3
    Member Array
    Join Date
    Apr 2012
    Location
    Melbourne, S.E Suburbs
    Car:
    05 DC5S
    ^ dont forget them buttons

  4. #4
    Is that it? Ok Awesome, Thanks guys.

  5. #5
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    you would probably want to chnage the door trims and window regulators while your at it.

    the CXi has the central locking locks already, you just have to connect the wires.

  6. #6
    Member Array
    Join Date
    May 2010
    Location
    Melbourne
    Car:
    2000 DC2R
    Was searching for central locking and just found this thread. Was wondering my ek cxi has central locking, but i bought a remote locking kit. Would i need a driver side actuator to make it work?
    3 guys walk into a bar. The first guy told the D to get a B series.The second guy told the B to get a K series. The last guy told the K to fk off just get a V8 mate.

  7. #7
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    the actuators are already in the car, just not wired ( both doors )

    take the door trim off and look for the connectors, all you have to do is add the wiring and control unit.

  8. #8
    Member Array
    Join Date
    Jul 2006
    Location
    Brisbane
    Car:
    S2000/EK4/EJ8
    Might aswell Do it all at once, however The door Trims Wont fit due to the Size difference from a Sedan to a Hatch.

  9. #9
    Oh ok, Is the Window Regulator The Power Window Thing? Will The Sedan Fit on the Hatch aswell?

  10. #10
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    yes and no

  11. #11
    Member Array
    Join Date
    May 2010
    Location
    Melbourne
    Car:
    2000 DC2R
    oh ok beautiful so if i follow the wiring diagram everything should work fine?
    3 guys walk into a bar. The first guy told the D to get a B series.The second guy told the B to get a K series. The last guy told the K to fk off just get a V8 mate.

  12. #12
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    Quote Originally Posted by ECU-MAN View Post
    the actuators are already in the car, just not wired ( both doors )

    take the door trim off and look for the connectors, all you have to do is add the wiring and control unit.
    lol seriously?

    thats fcuking funny
    to see all of my build, checkout


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.