Swapping seats

**TweetR** · 28-08-2012 07:54 AM

Hi guys,

Im about to purchase a new passenger side sr3 recaro which will be replacing my driver side seat.

Problem is, will the adjuster be in the way because its on the other side? Is it possible to have a passenger side on the driver side?

Thanks, Moe.

**DakDak** · 28-08-2012 07:57 AM

Why don't you swap the seat rails over from your old drivers side to the new sr3?

**TweetR** · 28-08-2012 08:00 AM

I am swapping them but i was just worried about the actual seat adjusters.

Originally Posted by DakDak

Why don't you swap the seat rails over from your old drivers side to the new sr3?

**DakDak** · 28-08-2012 08:27 AM

Its interchangeable if your existing seat is a sr3. Move sliders, out of rails and into the other one

**TweetR** · 28-08-2012 08:35 AM

Great! Thankyou for te help!

Originally Posted by DakDak

Its interchangeable if your existing seat is a sr3. Move sliders, out of rails and into the other one

**DakDak** · 28-08-2012 08:43 AM

And if that, doesn't work unbolt everything from one and move to the other.

**99ITR** · 29-08-2012 01:52 PM

are the seatbelt thing and seatbelt light cable attachment on the rails or recaro seat?

**tRipitaka** · 29-08-2012 04:07 PM

Dakdak, I believe the OP is referring to the actual recliner, and not the rail adjuster.

You won't have an issue with running a passenger side recaro on the driver side, other than having two seats with the recliners on the same side (rather than both on the inside).

Originally Posted by 99ITR

are the seatbelt thing and seatbelt light cable attachment on the rails or recaro seat?

on the rail.