Results 1 to 7 of 7
  1. #1
    Newcomer Array
    Join Date
    Oct 2005
    Location
    Sydney
    Car:
    Ej8

    2006 Hond Accord Euro CL9 interior light problem. PLEASE HELP!!

    Hi Guys,

    Over the weekdend i managed to blow a fuse/relay/module in my 2006 honda accord euro.
    I've checked all the fuses from the drivers side kick panel to the engine bay and no fuses appear to be blown.

    The problem i'm having is that the interior light does't come on when i unlock the car, nor does it even come on when i open the door however if the light is switched on manually it works but NOT if it's in the middle position which is auto.
    Can anyone tell me if theres an auto dimmer module/relay which i can check..?
    Please help me as i'm all out of ideas.

    cheers.

  2. #2
    Member Array
    Join Date
    Dec 2010
    Location
    Sydney
    Car:
    Accord Euro CL9
    I've been having exactly the same problem for a while now and havent really gotten around to fix it. I made a thread a while ago so maybe there might be some ideas in these you can try.
    http://www.ozhonda.com/forum/showthr...ior-dome-light

    However, when the tab is on auto function, there is a tiny little bit of light still coming through.

    If you happen to find a solution, please share!

  3. #3
    Newcomer Array
    Join Date
    Oct 2005
    Location
    Sydney
    Car:
    Ej8
    Quote Originally Posted by jordiiisme View Post
    I've been having exactly the same problem for a while now and havent really gotten around to fix it. I made a thread a while ago so maybe there might be some ideas in these you can try.
    http://www.ozhonda.com/forum/showthr...ior-dome-light

    However, when the tab is on auto function, there is a tiny little bit of light still coming through.



    If you happen to find a solution, please share!
    Okay, do you know where the auto dimmer sending unit is on the car ??

  4. #4
    Member Array
    Join Date
    Dec 2010
    Location
    Sydney
    Car:
    Accord Euro CL9
    no i dont sorry but you might get a better response posting in the accord euro part of the forum.

  5. #5
    Newcomer Array
    Join Date
    Oct 2005
    Location
    Sydney
    Car:
    Ej8
    Quote Originally Posted by jordiiisme View Post
    no i dont sorry but you might get a better response posting in the accord euro part of the forum.
    Fault found, problem solved!

  6. #6
    Member Array
    Join Date
    Dec 2010
    Location
    Sydney
    Car:
    Accord Euro CL9
    what was the problem? how did you fix it?

  7. #7
    Newcomer Array
    Join Date
    Oct 2005
    Location
    Sydney
    Car:
    Ej8
    Quote Originally Posted by jordiiisme View Post
    what was the problem? how did you fix it?
    I ran all the wiring back to the fuse box underneath the dash on the drivers side.
    I then Replaced the fuse box and clear all the codes after I installed it. Remember to unhock the battery if your gonna do it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.