-
hard to reach bolt, what can i do ? :(
trying to put everything back together.
but the bolt circled in picture below is so hard to get to.
i dont want to take the compression side of the turbo out just to do that.
anyone got any idea?
i cant fit my 17" spanner in......
the heat cause the bolt came loose.
any ideas?
-
them 3/8" socket elbow joints cant reach?
-
try from bottom?
jack up car, use 2-3 extensions
S P A M | W O R K S
With our special rotational tires, it will allow you to drive very fast. - JK Tyre
-
Originally Posted by mocchi
try from bottom?
jack up car, use 2-3 extensions
dont know if you can see, the turbo is right under the bolt.
not enough space around the bolts to fit a 17" spanner in either
-
Have u tried a offset spanner?
If all else fails, just Take off the manifold with the turbo, its prbz best way to do it....if not its the only way to do it, considering the very limited space u have, will save ur alot of hassle as well, an atleast than u can tighten up the bolt easier an tighter
-
hard to reach bolt, what can i do ? - REACH HARDER
LOL but as said above. Get extension rods and do from under the car with socket !!!!!!
-
Originally Posted by mugen_ctr
Have u tried a offset spanner?
If all else fails, just Take off the manifold with the turbo, its prbz best way to do it....if not its the only way to do it, considering the very limited space u have, will save ur alot of hassle as well, an atleast than u can tighten up the bolt easier an tighter
Bloody love offset spanners, thanks to them made my bushings a breeze o.o
Also thanks for giving me the name, I just called them weird bent spanner doodad-thingamabob
+1
-
Originally Posted by mugen_ctr
Have u tried a offset spanner?
If all else fails, just Take off the manifold with the turbo, its prbz best way to do it....if not its the only way to do it, considering the very limited space u have, will save ur alot of hassle as well, an atleast than u can tighten up the bolt easier an tighter
this wont fit in either, because there is some sensor or what not in the way as well.
i want to replace that bolt, but i cant even take it out!!!
it stuck!
-
Originally Posted by JDM DC2R
hard to reach bolt, what can i do ? - REACH HARDER
LOL but as said above. Get extension rods and do from under the car with socket !!!!!!
dont know if you can see, the turbo is right under the bolt.
i dont have an extension that can go through the turbo!
-
Can you take a pic from lower down so we can see it better
shine a light in there too
-
-
Yeah ... need a few more angles, because I might have something, just not sure ...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks