EP3 Type R

[RPS.13]

Yo yo Mike long time no speak what's happening?

Hey Perry.

Not much happening atm, I'm still slowly working on refurbishing my weds wheels. Sent off a pair of them last week to get the rash welded up and machined.

You still looking for wheels?

[Lukezen27]

Hey Perry.

Not much happening atm, I'm still slowly working on refurbishing my weds wheels. Sent off a pair of them last week to get the rash welded up and machined.

You still looking for wheels?

My WORKS are off for refurbishing... how much is the rash welded up and machining?

[Perry]

Hey Perry.

Not much happening atm, I'm still slowly working on refurbishing my weds wheels. Sent off a pair of them last week to get the rash welded up and machined.

You still looking for wheels?

ohh nice cant wait to see it finish.
Yeah still looking for something I really like and keep using for a bit anything good u came across lately?

[RPS.13]

My WORKS are off for refurbishing... how much is the rash welded up and machining?

$55 per wheel. Approx 15-20cm`s of rash all up on the two wheels, deepest spots were probably 2-3mm deep. It looked like the previous owner tried to diy and bend them back with some vice grips

[doosra]

got my plm headers and tegiwa exhaust installed by Haks Took about 3.5 hours to do and he did a great job not that i know much but he said its sitting really well as it has good ground clearance and good clearance to the chassis. The car sounds great when you give it but when idling or cruising at less than 3,000rpm, it sounds stock so its a very very quiet exhaust. I read somewhere that its a copy of the Fujitsubo rm01a. Overall very happy. Performance wise, havent driven it enough yet as I was traveling home in peak hour.

[mocchi]

Any recommendations for a place in Melbourne for an aircon regas?

x2 gonna need regas soon

[PHO]

Thanks to julia geebanger.

Regassing is exy as fuk.

[Icebox]

got my plm headers and tegiwa exhaust installed by Haks Took about 3.5 hours to do and he did a great job not that i know much but he said its sitting really well as it has good ground clearance and good clearance to the chassis. The car sounds great when you give it but when idling or cruising at less than 3,000rpm, it sounds stock so its a very very quiet exhaust. I read somewhere that its a copy of the Fujitsubo rm01a. Overall very happy. Performance wise, havent driven it enough yet as I was traveling home in peak hour.

wow looks freaking awesome!

[DreadAngel]

[intertia]

Does anyone have experience with fitting Recaro SPG bucket seats in the EP3 using stock rails? is it just a straight fit with the Recaro side brackets?

Anyone tried them with the Nagisa SLR rails, any comments on them, is the height adjustable on these?

[doosra]

anyone tried lamin x on their ep3? I'm thinkin of my next cheap mod. I've done it on my Audi and it looks great..

(that's the old man helping not me )

[DreadAngel]

Does anyone have experience with fitting Recaro SPG bucket seats in the EP3 using stock rails? is it just a straight fit with the Recaro side brackets?

Anyone tried them with the Nagisa SLR rails, any comments on them, is the height adjustable on these?

Check this out for stock rail fitment ---> Link