EP3 Type R

[uniqlo]

so exxy!

Sure are!

If you don't care for OEM and clips, cheapest option would be here.

They're actually one of ozhonda's sponsors selling in the forum for $79. Don't know how much shipping is though.

[Lukezen27]

Sure are!

If you don't care for OEM and clips, cheapest option would be here.

They're actually one of ozhonda's sponsors selling in the forum for $79. Don't know how much shipping is though.

My drivers side OEM visor ripped off round 170km so I'm not should tapes going to cut it lol

[uniqlo]

My drivers side OEM visor ripped off round 170km so I'm not should tapes going to cut it lol

Exactly why I'd rather piece of mind with clips. You have the option of adding tape too!

JDM Concept are cheaper (I got quotes) than going through jesse streeter, rhd and ooparts; It's still the best option.

[doosra]

I might give my visors a respray in a gloss black colour since they look faded and spray the side mirror arms as well. Anyone done this yet?

[TonyxTony]

saw 2 at the downshift meet. One had heaps of mod. looks pretty good! EP3 is getting popular in brisbane

could be me? lol i head down that way to get home, but yea i've also seen a one that heads down that way too, no plate was epk20 or something



so exxy!

[TonyxTony]

I use tyre shine for all black rubber/plastic around the car... works great, kinda water proof too... it restores them to a really black colour

I might give my visors a respray in a gloss black colour since they look faded and spray the side mirror arms as well. Anyone done this yet?

[UNA91]

saw 2 at the downshift meet. One had heaps of mod. looks pretty good! EP3 is getting popular in brisbane

Oh, i was at downshift! i parked on the grass near the sign. Tho i didn't stay long, it was packed tho, but too many commodores and the people there seemed to just judge others too much and had no respect.

and i usually just use scratch/swirl remover on the visors and it brings em back to life

[Symphorced]

I'd suggest sanding it down (varying grits) and then using a plastic polish on it. Used on a friend's Accord Euro Mugen visors and they turned up a treat.

[UNA91]

Got my plm headers installed on Monday, I'm not too impressed with the exhaust shops work who completely ripped me off just to install it. They didn't weld the slip joints like I asked them to, instead they just slathered the slip joints and every gasket with liquid gasket maker which flaked off due to the heat, it wasn't even proper type of liquid gasket to use on the exhaust (looks like the permatex ultra grey) . Now it's been leaking ever since the install, has a hissing/sputtering sound that drives me crazy and makes the car sound cheap

Tho I find it weird how I haven't got a check engine light yet. No defouler on it and using a 100cell cat. Starting to think the bulb is not working lol I'll get it scanned tomorrow

[mocchi]

Got my plm headers installed on Monday, I'm not too impressed with the exhaust shops work who completely ripped me off just to install it. They didn't weld the slip joints like I asked them to, instead they just slathered the slip joints and every gasket with liquid gasket maker which flaked off due to the heat, it wasn't even proper type of liquid gasket to use on the exhaust (looks like the permatex ultra grey) . Now it's been leaking ever since the install, has a hissing/sputtering sound that drives me crazy and makes the car sound cheap

Tho I find it weird how I haven't got a check engine light yet. No defouler on it and using a 100cell cat. Starting to think the bulb is not working lol I'll get it scanned tomorrow

how much was the fitting cost you?
inb4 no bulb for CEL lol

[UNA91]

how much was the fitting cost you?
inb4 no bulb for CEL lol

paid $376 just for labour... I provided all materials including cat.

[doosra]

anyone gone to a car wash for steam clean on red recaro seats before? Thoughts? My drivers side are going a bit brown so in need of a clean.

note: i've already seen the thread with woolite...