***Official What did you do to your ED/EF/CRX today!***

**markismaximus** · 09-01-2013 07:15 AM

prepped and sprayed my hatch spoiler in primer (got a HVLP gun for xmas)

First time I've ever sprayed not using a can. Pretty impressed with the lack of overspray from it

**CivicEGSI** · 09-01-2013 11:19 AM

I approve

**CivicEGSI** · 09-01-2013 11:21 AM

Originally Posted by markismaximus

just buy rear brake assembly off an EG Si or VTi.

They can be bolted up, are newer, and easier to find replacement parts for in AUS.

I'm running EG Vti discs all round on my ED. Front have the discs and calipers swapped over but still using the ED knuckle, rears have the whole rear brake hub (trailing arm is still ED part)

+1. post more photos and create a build thread. There are still some ED junkies around that need a fix

Already have brakes man. Not goin to buy another set

**chargeR** · 11-01-2013 03:23 PM

Originally Posted by CivicEGSI

Anyone know if Crx and jap spec ED6 have same rear disc brakes? Dont know what to look for when buying them

If you mean EF2 (25X models) they come with rear drum, not the same as ED9/EF7 or EF8.

**Chernoby1** · 11-01-2013 05:38 PM

go to start car, break immobilizer remote. FUUUUUUUUUUUUUU

Using an led as tweezers... ghetto as hahaha.

**CivicEGSI** · 11-01-2013 08:47 PM

Originally Posted by chargeR

If you mean EF2 (25X models) they come with rear drum, not the same as ED9/EF7 or EF8.

I dont know, dont pressure meeeee

**CAUSHN** · 12-01-2013 07:35 PM

So been a month or so since i been on and the sol is moving slowly. Didnt get everything done prior to xmas but got the mounts in and in 2 weeks going in to get the bushes finally done and check a noise around my right wheel...think the hub or drive shaft has crapped itself.....CRAAAAAPPPPP oh well cars ay.

**CAUSHN** · 12-01-2013 07:37 PM

was the last time here what a poor effort.

**Kenninho** · 14-01-2013 12:30 PM

Originally Posted by Chernoby1

go to start car, break immobilizer remote. FUUUUUUUUUUUUUU

Using an led as tweezers... ghetto as hahaha.

so the pushbutton pins have snapped from the PCB? or something else wrong with the remote? easy fix brah

**Chernoby1** · 14-01-2013 12:40 PM

The imob lost power, went into a safety loop and can't bw brought out until you do a manual override. To do thus you need a 4 digit pin that I done have. Le sigh. (I've worked out how to do it though)

Biggest problem with the remote was that it's surface mount and I don't have a small enough tip

**Kenninho** · 14-01-2013 02:10 PM

Originally Posted by Chernoby1

The imob lost power, went into a safety loop and can't bw brought out until you do a manual override. To do thus you need a 4 digit pin that I done have. Le sigh. (I've worked out how to do it though)

Biggest problem with the remote was that it's surface mount and I don't have a small enough tip

Lol I usually go back to uni to solder my SMD stuff