98 spec jdm dc2r uses a 36mm drivshaft so obviously the hub size will be 36mm
to fit this to another honda you will need hubs, brakes, 36mm drivshafts handbrake lines specific to eg/dc2 or ek
all ek9 models have 32mm hubs and will fit all models suitable for 5 lug conversion
audm dc2r models are also 32mm hubs are pretty much identical to ek9 brakes
obviously honda saved the best brake set up for its final release of the best b series motor made
honda wouldnt of gone to this effort for nothing
FWIW I've compared EK9 and DC2R 5 stud and the EK front knuckles are slightly shorter than EG/DC2, approx. 7mm shorter at the top. The casting is also different..
i.e. if you use DC2R 5 stud on an EK you will get funky front camber issues....
Bookmarks