Your Mods To 2006-2011 FD Civics

[jprak]

got vids of launch control? i wanna see

[EKVTIR-T]

Curtis265 excuse my terminology, JDM = AUDM for me ... LOL ! This is the standard Yanky Flashpro that is supplied for the USDM R18a's, Benny has been clever enough to get Flashpro talking 100% with my motor ! Launch control is set at 4,000rpm and my speedo will be recalibrated to 250kmh, currently it cuts out at 210kmh. TBH I was expecting the Turbo would pull hard but Im a bit shocked at how hard it pulls early in the rev range.

which turbin did you use?

[lolmclol]

which turbin did you use?

Should/might be the garrett GT25 turbo

[Stevil]

little old Garrett GT25, ball bearing GT25 was a $300 upgrade, but with the turbo coming on so early with our single cam I didnt see the point !

[lolmclol]

hrhr beat you by a few seconds there Stevil :-P

[EKVTIR-T]

Ah no wonder it spools early,theyre great for small engines and power outputs

very response

[Benson]

I'm quite impressed with the power gain from such a simple kit. By far, the best bang for buck! nearly 50kw gain and nearly doubling torque across the entire rev range!

[xenonkuraz]

I'm quite impressed with the power gain from such a simple kit. By far, the best bang for buck! nearly 50kw gain and nearly doubling torque across the entire rev range!

Initially I gained 50kw too! 6psi, stock exhaust and garrett gt2860rs.

now after doing a full exhaust mod and further intake mods, its doing almost 80kw on stock, boosting from as low as 1000rpm

[curtis265]

Ah nice, they are very response. Low/mid Torque is what you want

[connorling]

most common mod for FD in Australia

[xenonkuraz]

I got teh standard silver onez

[Areis]

most common mod for FD in Australia

Not on this forum lol