-
20-02-2013 09:23 PM
#15241
Oh and Johnny, how'd you go with installing the springs??
-
20-02-2013 09:56 PM
#15242
never get white rims that are multi spoked. The furthest i'd go are white te37s.. any more spokes such as ce28 and you get back pains and headaches tryna clean that shit lolol... and then two days later back to grey.. i had white xd9s and it was a mission to clean well... not to mention how dirty the inner part of the wheel gets and good luck cleaning that without some degreaser of some sort T_T...
-
20-02-2013 10:47 PM
#15243
Cleaning my wheels makes me want to rage quit life. hahahahha i dont even bother anymore LOL!
-
21-02-2013 12:02 AM
#15244
^oh damnnn i was thinking of plastidipping my wheels... guess not now lol
-
21-02-2013 12:05 AM
#15245
 Originally Posted by j_me
Oh and Johnny, how'd you go with installing the springs??
hey jamie! OMG a mission esp the rears for some reason<.< but we got it done! thanks again for the springs =)
here's the pic also put the my new lug nuts in
-
21-02-2013 01:00 AM
#15246
 Originally Posted by j_me
Welcomeee!  My rims are XXR 530s!
I plastidipped my XXRs are they are seriously the worst to clean, all the dirt gets like stuck inside and no matter how hard I scrub it doesn't come off!!  I wanna get them powder coated, or just get rid of them hahaha
That's because you probably didn't do them right, shit job yields shit results.
Inb4 flamed.
-
21-02-2013 01:02 AM
#15247
 Originally Posted by EKVTIR-T
but_not_jdm
Dat true aye ... needs more ymcmb
-
21-02-2013 01:20 AM
#15248
 Originally Posted by curtis265
True¡ enkeos are quite cheap!
Harith, are u sure about brakes... They really costly..
The work wheels will earn you instant jdm respect
I found this, bit of a nasty scrape. If its pretty bad I could do is get them 4, buy 1 new one and keep the scraped one as a spare. What ya's rkn? Any other place I could get good 2nd hand wheels in perth? PHC guys, Im looking at you! =P
http://www.gumtree.com.au/s-ad/balla...200/1013811161
Thanks guys, advice duly noted and I'll scrap the brakes. Will also steer away from too many spoked white rims.
-
21-02-2013 02:07 AM
#15249
Plastidip doesnt clean well guys.... Brake dust sticks to it
harricade thats cheap!!
S P A M | W O R K S
hehe.
PHC
-
21-02-2013 06:02 AM
#15250
 Originally Posted by Harricade
I found this, bit of a nasty scrape. If its pretty bad I could do is get them 4, buy 1 new one and keep the scraped one as a spare. What ya's rkn? Any other place I could get good 2nd hand wheels in perth? PHC guys, Im looking at you! =P
http://www.gumtree.com.au/s-ad/balla...200/1013811161
Thanks guys, advice duly noted and I'll scrap the brakes. Will also steer away from too many spoked white rims.
Personally, those rims are not worth getting at that price and condition. The width and offset are a bit weak for a FD
Also white rims are a bitch to clean.
 Old man that drives slow cars 
-
21-02-2013 07:27 AM
#15251
1.2 isnt that cheap either. cr kais sell pretty cheap these days
-
21-02-2013 07:43 AM
#15252
What colour rims, would you guys reccomend, to suit with a civic that has the spakle grey pearlescent colour?
I feel like i should get the car painted in white lol!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks