Got my wheels aligned today
Turns out they cant do it
my whole back end is ****ed
They recon i need new lower control arms
My rear left toe is -1.10 while the right is -1.05
Camber left -1.8, while the right is -0.9
Any ideas besides getting new LCAs?
You've gone through more accords than I changed underwear this month! - Sugz
Cheers mate
I'm always doing D.I.Y stuff on my car
With patience and a good angle - i used needle nose long pliers
My fiance tried to help but wasn't enough room
I pretty much used the caliper cover as a wedge and pushed the piston in - i may have made a few nicks in the caliper
I used a bit of silicone paste so the boot wouldn't bind
I have done these brakes before ( on my last accord) And took my uncle and i 3 hours as we didn't know you had to twist them in
You've gone through more accords than I changed underwear this month! - Sugz
Nahh man they're the ones on the car
They look bent and i cant re-align my rear til they're fixed
I need them both replaced, my inner & outter tie rods and my left CV - fun times ahead
You've gone through more accords than I changed underwear this month! - Sugz
Cheers
I'm probably gonna replace the whole shaft
Just worried about the bushings for the control arms
And there's two lower set's for my car - so hopefully its just the big ones
You've gone through more accords than I changed underwear this month! - Sugz
Bookmarks