***Official What did you do to your ED/EF/CRX today!***

[~Sp33~]

That stezza is sick!

[grifty]

That stezza is sick!

It's even better at night when its all lit up

Turns out i wasted my time on the fog light brackets, they don't even come close to fitting.... looks like I'll have to make my own.

[~Sp33~]

Did you get any pics on how they're different?

No issues with my Concerto foggies on my EF :P

[grifty]

Will get some pics up on Saturday, wanna swap brackets?

[~Sp33~]

Will get some pics up on Saturday, wanna swap brackets?

Mine aren't in great condish. They work though. :P

[grifty]

Got any close up pics? I have no idea how they even look like, would be great so i can make my own

[~Sp33~]

I might be able to grab some tomoz. Basically it uses the same bolts as the bumper support, it just gets sandwhiched between the bumper support and the bulk head.

If all you grabbed from the EF is what's in the pic, then you still need another part of the bracket that's probably still bolted to the car.

I just did a quick shoopdewhoop, this is what makes the magic happen:

[grifty]

Cheers for the pic!

These are the ones correct (pic taken from the net)? The EF2 never had those, only these ones which are held on with a few welds onto the bumper support.



This is the EF2 bumper support




And this is the Concerto one, you see how the mount to the chassis is alot further back compared to the EF2.



here it is with the bolt mounting face lined up with the Concerto one, you can see how the top part is not even close to the bumper support

[~Sp33~]

Oh i understand. Yeah i haven't seen those brackets before to be honest.

The correct brackets could be easily duplicated though. I might even be able to get one made for you.

[YeahByuddy]

that the one

[VT3C]

finally got around to fitting my 'old' Spoon Steering Wheel.. with Spoon Boss kit for EF9..

[markismaximus]

removed dash, dash and engine harness, and continued cleaning up the bay on the sedan.

Also did a coolant flush and replaced coolant on the hatch