Finally got my buddyclubs from the good guys at JDM Yard
Installed them with a friend today using this great guide:
http://www.tsxclub.com/forums/1st-ge...n-install.html
Only encountered 1 problem, the HID auto leveling sensor on the front wheel.
below you can see the bolt that goes onto a little bracket that the stock strut had, but the new coilovers didnt. Ive heard you can get aftermarket brackets that fit on, but i just wanted to do a short term fix, which is the 2nd photo.
Here are the before pics:
And after:
the stiffness is set to 8 clicks front, 10 clicks rear.
The height is 115mm front and 125 rear (between thread locks).
Bookmarks