EP3 Type R

**DreadAngel** · 01-06-2013 08:32 PM

Originally Posted by UNA91

Ah alright sweet, some reason s2k front pads are cheaper than ep3 or dc5 for the same brand

Double check to ensure that the EP3/DC5 listings aren't for the base models? Cause in North America, while we didn't get it here, received the EP3 Si which has different brake setup to the EP3R. DC5 obviously different too...

**UNA91** · 02-06-2013 12:03 AM

Originally Posted by DreadAngel

Double check to ensure that the EP3/DC5 listings aren't for the base models? Cause in North America, while we didn't get it here, received the EP3 Si which has different brake setup to the EP3R. DC5 obviously different too...

Are all S2k brakes the same? Also, Is it fine to run different brand rear pads?

**DreadAngel** · 02-06-2013 12:49 AM

S2000 no difference between countries =)

I wish so too, but Honda GB wanted to keep the price down and Honda JP cbf putting Brembos on I guess to differentiate the DC5R and EP3R more lolz.

**Symphorced** · 02-06-2013 01:07 AM

Originally Posted by UNA91

Are all S2k brakes the same? Also, Is it fine to run different brand rear pads?

Yep. I run DS2500 fronts and EBC Yellows rear. Hold up quite well on the track and operate fine on street too. Don't need too much heat in them to bite.

Will be going for Project Mu HC+ next time I change, I think.

**DreadAngel** · 02-06-2013 01:26 AM

Should go for Endless MXRS man =D

I'm gonna try that for one of the project cars I'm working on =)

They're an improved version of the Endless MX72s which I had on my 111... One of the very best I've used =D

EDIT: Project Mu HC+ is better if you're solely looking at track... They'll much weak rotors lolz

**flop101** · 02-06-2013 10:34 AM

What's people's opinion on this ep3r
http://www.carsales.com.au/private/d...D-904611/?Cr=8
I posted in a separate thread about it, but there seems to be a lot of know how in this thread also. Speedo doesn't work and SRS light is always on.