Page 1381 of 1751 FirstFirst ... 3818811281133113711378137913801381138213831384139114311481 ... LastLast
Results 16,561 to 16,572 of 21004
  1. #16561
    Member Array
    Join Date
    Mar 2007
    Location
    Melbourne
    Car:
    FD2 N/A what?
    no idea what you're trying to say there
    i live my life full boost, one gear at a time.

  2. #16562
    Quote Originally Posted by xenonkuraz View Post
    no idea what you're trying to say there
    I was asked which FD i had because someone was selling an FD1 intake.
    Doesnt matter if its FD1 or FD2. R18 and K20 is the same for both models



    AND! Paint your rims Yellow. Yellow and Silver go well.
    (My Personal Opinion)

    Last edited by Honda_FD; 07-08-2013 at 07:18 PM.

  3. #16563
    Member Array
    Join Date
    Mar 2007
    Location
    Melbourne
    Car:
    FD2 N/A what?
    Ok that's why I didn't understand what you were saying. R18 and K20 are in no way similar. An R18 intake will not fit a K20 motor. Vice versa
    i live my life full boost, one gear at a time.

  4. #16564
    Member Array
    Join Date
    Oct 2010
    Location
    Melbourne
    Car:
    Grocery getter
    Chrome lad
    I don't even know anymore.

  5. #16565
    Can the FD use 17x9+22 at the front without hitting the coilovers or rubbing against anything?

    Might consider looking into these..

    http://firesport.com.au/enkei-17-2pc...--ad238189.htm

  6. #16566
    Hmm ... Should be alright, would just run with some camber and make sure your guards are rolled, its the outer clearance that I'd be concerned with, I'm pretty confident inner clearance is fine.

  7. #16567
    Quote Originally Posted by lolmclol View Post
    Hmm ... Should be alright, would just run with some camber and make sure your guards are rolled, its the outer clearance that I'd be concerned with, I'm pretty confident inner clearance is fine.
    Sweet. With 215/45/17 Rolled guards and bring the height back up. should be fine?

  8. #16568
    Quote Originally Posted by Honda_FD View Post
    Sweet. With 215/45/17 Rolled guards and bring the height back up. should be fine?
    Would go for a bit of a thinner side wall of 40.

    Are you running coilovers? Camber arms?

  9. #16569
    Quote Originally Posted by lolmclol View Post
    Would go for a bit of a thinner side wall of 40.

    Are you running coilovers? Camber arms?
    BC BR Coilovers with Camber top
    Nothing in the rear

    Should be fine? The inside sits where my stock wheel sits.

    Last edited by Honda_FD; 08-08-2013 at 03:51 PM.

  10. #16570
    Member Array
    Join Date
    Mar 2007
    Location
    Melbourne
    Car:
    FD2 N/A what?
    That's a good stretch. I run 235/40 on 9 and 9.5"
    i live my life full boost, one gear at a time.

  11. #16571
    Hey guys does anyone know... is the RR front bumper or stock with mugen lip at stock height lower? or maybe its the same height?

  12. #16572
    I think the RR bumper is about 10mm lower, with the mugen lip I'd assume the same 10mm lower than stock (remember it has to look flush with side skirts so I'd go by that as an indicator).

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.