how do you install LED light for mugen lip?

[bernstar69]

hi, i recently bought this : http://www.ebay.com/itm/390526732774...84.m1423.l2649

i was wondering, if there was any guide for installing the back led light ?

thanks

[kikimushroom]

Maybe you can try cut into your third brake light wire and connect it there. Im not too sure.

[Grayfox]

it is a rear foglight so

you have to tap the rear foglight or make a rear foglight circuit

[nicho]

Go to an auto electrician and they'll do it for you. Got mine done @ Mt Prichard for 80 bucks

[Baygon]

Gotta wire it to your tail lights

[Grayfox]

This is the wiring diagram you need.

I quickly drew it up in GIMP.

I do not know the wire color for the rear foglight so i just picked brown.




Note to others: it is not a brake or taillightas it is too low.

Look at cars like the BR-Z/GT-86.

They even mention it is a fog
http://www.8thcivic.com/forums/8876834-post13.html.

Since i do not own an civic sedan i do not know if it has a rear foglight but if it doesn't it is not that hard to wire up.

[jprak]

Go to an auto electrician and they'll do it for you. Got mine done @ Mt Prichard for 80 bucks

+1 me and nicho got it from the same place.

[Grayfox]

If you know nothing about electrics or do not feel confident in doing it yourself get it done by a sparkie, but if you think you can do it, you can safe some money while at it.

[bernstar69]

Hmm thanks for the input, 80 dollars just for wiring..... i might have a go at diy wish me luck

[Grayfox]

Just make sure you tap the correct wire.

The rear fog(if fitted) will be on the driver side.
Just use a fork spade connector to crimp the ground wire from the LED and use a chassis bolt as a ground point by loosening a bolt insert the U part into the bolt and tighten bolt to sercure) make sure you use a bolt that is for holding panels down or some other grounding bolt.