Page 48 of 62 FirstFirst ... 384546474849505158 ... LastLast
Results 565 to 576 of 733
  1. #565

  2. #566
    Quote Originally Posted by doosra View Post
    Would 17 x 7 +24 on ep3 fit. Car is lowered with no gap. Currently have guards rolled and have 17 x 8 +35 and they fit no issues but concerned 17x7 +24 is too aggressive..
    Here's how it currently looks
    [IG]http://img407.imageshack.us/img407/7315/nn09.jpg[/IMG]
    Merely two posts above yours and you disregarded the post quoted bellow. :-/

    Quote Originally Posted by RPS.13 View Post
    Found another wheel/tyre fitment calculator, this one also allows you to enter your camber settings and it gives you a diagram of it too!

    http://www.fitmywheels.com/

    AWESOME!!!
    To answer your question, I don't think you'll have any problems as your inner clearance is better, but your outer clearance is decreased a tiny bit. (disregard tyre size, I just typed in numbers at random)


  3. #567
    Member Array
    Join Date
    Mar 2007
    Location
    Sydney
    Car:
    Civic ep3
    Thanks mate.. That's good news. Great website

  4. #568
    Ok. Thanks for the advice

  5. #569
    Member Array
    Join Date
    Mar 2007
    Location
    Sydney
    Car:
    Civic ep3
    Quote Originally Posted by lolmclol View Post
    Merely two posts above yours and you disregarded the post quoted bellow. :-/



    To answer your question, I don't think you'll have any problems as your inner clearance is better, but your outer clearance is decreased a tiny bit. (disregard tyre size, I just typed in numbers at random)

    So I got the wheels 17 x 7 +24 and fitted them on the car. Word of advice, this is too aggressive if you are lowered. Had to raise my rears about and inch so there is gap between guard and tyre.. If you want your tyres with no gap sitting under guard then best to stick to around +35 offset.

  6. #570
    No camber?

  7. #571
    Member Array
    Join Date
    Mar 2007
    Location
    Sydney
    Car:
    Civic ep3
    Its my daily so prefer no camber

  8. #572
    Quote Originally Posted by doosra View Post
    So I got the wheels 17 x 7 +24 and fitted them on the car. Word of advice, this is too aggressive if you are lowered. Had to raise my rears about and inch so there is gap between guard and tyre.. If you want your tyres with no gap sitting under guard then best to stick to around +35 offset.
    wat? 7"+24 sticks out the same amount as 8"+35
    KEEP IT VIET | KEEP IT JDM
    FaLL iN LoVe WheN YoU aRe ReAdY, NoT WhEN YoU ARe LOnEly

  9. #573
    Member Array
    Join Date
    Mar 2007
    Location
    Sydney
    Car:
    Civic ep3
    I think they're actually scrubbing on rear bumper part

    Here's how they sit


  10. #574
    Seeing as you're already running low on a daily, what's the harm realistically on running camber?

  11. #575
    Quote Originally Posted by doosra View Post
    So I got the wheels 17 x 7 +24 and fitted them on the car. Word of advice, this is too aggressive if you are lowered. Had to raise my rears about and inch so there is gap between guard and tyre.. If you want your tyres with no gap sitting under guard then best to stick to around +35 offset.
    +24 offset is fine. You just need smaller tyres.
    get 215/40 next

    225/45 on a 7" is too chunky
    Last edited by Honda_FD; 30-10-2013 at 09:11 PM.

  12. #576
    Member Array
    Join Date
    Mar 2007
    Location
    Sydney
    Car:
    Civic ep3
    I'm on 215 not 225.... And going from 45 to 40 will just increase gap between guard and tyre which I don't want..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.