WTF, who did your alignment? Firstly, they can't find your car. Secondly your toe is off, your camber at the front is un even
Shouldn't camber be less negative on the drivers side compared to the passenger at the front? Seems to be opposite. :/ Who did that alignment? Lol
Last edited by joyride; Today at 07:26 AM. Reason: Ask for permission if you're going to use someone elses pic
With the camber plates, they should of got the even camber settings.
epvtir
Originally Posted by stienerv2 With the camber plates, they should of got the even camber settings. Even camber settings only ideal when they do the alignment with a person in the drivers seat. Usually the front drivers wheel has less camber than the passenger, to account for the weight in drivers seat. Once you sit in car camber should be almost even. But hes got more camber on the drivers side compared to the left side. So I'm a bit confused..
Originally Posted by PHO Even camber settings only ideal when they do the alignment with a person in the drivers seat. Usually the front drivers wheel has less camber than the passenger, to account for the weight in drivers seat. Once you sit in car camber should be almost even. But hes got more camber on the drivers side compared to the left side. So I'm a bit confused.. account for tha missus brah lol jk doosra dun hurt me
KEEP IT VIET | KEEP IT JDMFaLL iN LoVe WheN YoU aRe ReAdY, NoT WhEN YoU ARe LOnEly
God damn.. Seems they did a shit job aye. Can u guys tell me what I should be looking for then? Might go back or go to someone else...
F.S: Parts for sale: http://www.ozhonda.com/forum/showthr...ar-Knobs-etc..
Originally Posted by charliebrown account for tha missus brah lol jk doosra dun hurt me Ahahah.. That's a good one... But sorry, "no fat chics" lol
Here are my old results with the RPF1s 17*9+22 and + 35
Originally Posted by doosra God damn.. Seems they did a shit job aye. Can u guys tell me what I should be looking for then? Might go back or go to someone else... What wheels and tyre combo do you have?
17 x 7 +24 and kumho ku31 215/45/17
My older settings for my 17*7+30 and 215/40/17 were: Height: Saggy Tein S-Tech Springs (Slammed) Front Camber: -1.5 Front Toe: +0.21 Rear Camber: -3 (not ideal, I reckon -2.5 was enough) Rear Toe: +0.5 Rear bumper remained unmolested until i got the 9 inch wheels in
View Tag Cloud
Forum Rules
Bookmarks