Your Mods To 2006-2011 FD Civics

**iou** · 03-12-2013 03:58 PM

guys, does anyone know good panel beater shop in west Melbourne?
Thanks

**IEVAQ8** · 03-12-2013 04:04 PM

Originally Posted by iou

guys, does anyone know good panel beater shop in west Melbourne?
Thanks

On duty panels, sommerville rd, west footscray

Ask.for.Sam & tell him.Honda Tom.sent.u...

**SharkChu** · 03-12-2013 04:19 PM

Attempted no.1 @ retrofitting the bulbs, failed.

Need a dremel with a sanding bit, to sand down the headlight housing back .. can't find a cheap one around here =[

**Honda_FD** · 03-12-2013 04:42 PM

Originally Posted by NeedVtec

got pics of the car when it was on the pedders?

also wanna sell em?

Michael, I have Eibach Pro Series springs if you wanna buy them

2" Drop When i had them with my stock 17" wheels. there was about 2 finger gap from tyre to guard.
Never rubbed though

**iou** · 03-12-2013 08:14 PM

thanks bro

**iou** · 04-12-2013 11:21 AM

my friend just back from oversea and he's got this one
Are they be able to put on honda FD1?

**jprak** · 04-12-2013 01:02 PM

If it's legit it should fit

**Honda_FD** · 04-12-2013 02:50 PM

Originally Posted by iou

guys, does anyone know good panel beater shop in west Melbourne?
Thanks

hey IOU, Are you the one with the white FD, Mugen Spoiler, and black bits and pieces?
I always see it in my area but dont know who owns it. Always parked at the bottle shop in Glengala

**SharkChu** · 04-12-2013 03:03 PM

Need advice!

I've finally got the projectors into the reflector bowl housing.

I now need advice on a few things..

1. Painting the inside of the reflector bulb matte black (to prevent any glare), how do you suppose I go about this? Never used a spray paint in my life.. haha

2. I have a 2 grounding wires that I need to put somewhere (they suggest somewhere on chassis that has direct contact with metal), also I have a relay and 2 ballasts to mount .. does anyone know where about are a good location for these? I'm completely clueless! Just beeing browsing though 8th civic.

3. I need an "epoxy" glue or something similar, for the back of the projector, to secure it into place.. anyone recommend some? I'll take a trip down to supercheap, but not sure what I'm ment to be looking for.

4. Finally, anti-rust, a lot of the items and provided screws look like they will rust over time, should I purchase like an anti-rust paint? to coat it?

Thanks, any further advice would be welcomed! This retrofitting is hella complicated for a complete noob like me. lol

**iou** · 04-12-2013 03:34 PM

Originally Posted by jprak

If it's legit it should fit

i think it's legit

**iou** · 04-12-2013 03:35 PM

Originally Posted by Honda_FD

hey IOU, Are you the one with the white FD, Mugen Spoiler, and black bits and pieces?
I always see it in my area but dont know who owns it. Always parked at the bottle shop in Glengala

No, thats not me :-)