Page 1328 of 1384 FirstFirst ... 328828122812781318132513261327132813291330133113381378 ... LastLast
Results 15,925 to 15,936 of 16607

Thread: EP3 Type R

  1. #15925
    Member Array
    Join Date
    Nov 2011
    Car:
    Scooter Type R
    Anyone know if a dying alternator could cause struggle start? My car sounds like it struggles a bit to start, it doesn't start instantly like it use to. It's not so bad in my car but I'm just really picky with little issues and my other EP3 seems to have the same issue as well.

  2. #15926
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    Could be the battery wearing out, when i changed my battery to a higher CCA rating, it started almost instantly
    vtak + jrsc = bwwaaaahinneeeee

    IF GUNS don't kill people, people kill people does that mean that toasters don't toast toast, toast toast toast?

  3. #15927
    Member Array
    Join Date
    Nov 2011
    Car:
    Scooter Type R
    Quote Originally Posted by UNA91 View Post
    Could be the battery wearing out, when i changed my battery to a higher CCA rating, it started almost instantly
    I thought it would be the battery but my battery is almost brand new.

  4. #15928
    So, my engine light came on yesterday. Car still runs without skipping a beat so I have no idea what it could be. I disconnected the battery for about a minute yesterday and that cleared the engine light. But, it came back on this morning - car still runs perfectly.

    Can anyone suggest anything? How can I diagnose the error?

  5. #15929
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    Whatever you do, do not disconnect the battery again. This makes diagnosing problems that much harder for a mechanic. Best bet would be to get an OBDII scanner connected to the car and find out what the problem is
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  6. #15930
    Quote Originally Posted by stndrd View Post
    Whatever you do, do not disconnect the battery again. This makes diagnosing problems that much harder for a mechanic. Best bet would be to get an OBDII scanner connected to the car and find out what the problem is
    Whoops. Ok, thanks stndrd. Is it safe to continue driving the car at the moment?
    Should any mechanic have a OBDII?

  7. #15931
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    It is safe to drive the car, provided you drive it carefully. Most mechanics have OBDII readers. What state are you located in so I can direct you to a workshop?
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  8. #15932

  9. #15933
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    Don't know anyone up there unfortunately. Best bet would be go and see Honda
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

  10. #15934
    A couple blokes from a Darwin car enthusiast group on Facebook has offered to help clear it

  11. #15935
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    Just installed a Jackson racing supercharger and on my first start i could see the car was about to overheat on kpro (100' Celsius), i notice the coolant is not circulating at all and the fans aren't cooling... what could be the problem? I've checked all plugs and they're all in the correct place and properly in. Waterpump isn't making any funny noises either...
    vtak + jrsc = bwwaaaahinneeeee

    IF GUNS don't kill people, people kill people does that mean that toasters don't toast toast, toast toast toast?

  12. #15936
    Member Array
    Join Date
    May 2010
    Location
    Melbourne, West
    Car:
    EP3
    Quote Originally Posted by UNA91 View Post
    Just installed a Jackson racing supercharger and on my first start i could see the car was about to overheat on kpro (100' Celsius), i notice the coolant is not circulating at all and the fans aren't cooling... what could be the problem? I've checked all plugs and they're all in the correct place and properly in. Waterpump isn't making any funny noises either...
    Make sure you've bled the system properly! Google some guides on how to do it.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.