D16Y4 ignitor part number.

**nd55** · 14-01-2009 09:40 PM

Anyone know the part number of the ignitor/ignition control module in the D16Y4 GLi/CXi EK civic.

A Bosch/NEC/Hitachi number would be great.

Nick.

**ECU-MAN** · 16-01-2009 08:16 AM

Call your loacl honda delaler and ask them

**nd55** · 16-01-2009 03:11 PM

> Call your local honda delaler and ask them

Been there.

They have Honda Part numbers only.

They also said the ignitor is not available. Have to buy a whole dizzy.

I'm after the Bosch/Hitachi number or whoever actually make the ignitor.

Nick.

**nd55** · 19-01-2009 02:20 PM

Honda part number is either
30100-PP2-004 or 30100-PC2-004.

TEC distributor.

I think I wrote it down incorrectly. I belong in 3rd grade by my writing.

A TD-80U does not fit.
It bolts up, but the electrical connector is different.

Any comments?

Nick.

**nd55** · 19-01-2009 02:27 PM

These Hitachi D4T94-05 dizzies look like the connector is right.

http://cgi.ebay.com/ebaymotors/1996-...Q5fAccessories

This hitachi pizzy claims to use the same part number but is clear different.

http://cgi.ebay.com/ebaymotors/1996-...Q5fAccessories

Grrr, Damn you Honda.

Nick.

**ECU-MAN** · 20-01-2009 08:03 AM

the ICM's might be the same,

Ill have a look in a EK1 Dizzy I have tonight and let you know,

has your ICM failed ??

**JasonGilholme** · 20-01-2009 08:29 AM

what code is on the housing of your distributor?

If you wanna look up all the different codes with pictures of the appropriate housings/plugs go to www.distributorking.com. i've been lookin for a new TD81U distributor for my b16 | OBD2 engine and these were the only place that were able to show me correct pictures/part numbers etc.

Even if you're not going to buy from there, you may be able to match up pics to help you along the way.

**nd55** · 20-01-2009 11:59 AM

> has your ICM failed ??

I believe so.

Sourcing the correct new parts without paying a arm and a leg is an issue.

> go to www.distributorking.com.

Yes, I'm aware of these guys.
Any body want to comment on the quality?

> Ill have a look in a EK1 Dizzy I have tonight and let you know,

The Aus. GLi/CXi spec dizzy has a unique ignitor. The connector, ignitor and optical trigger are all integrated in the one case.

This means its not bolt in compatible with anything else.

Nick.

**JasonGilholme** · 20-01-2009 12:33 PM

what code is on the housing of your dizzy.

Distributor king quality seems to be ok. I'm buying from them right now.

**nd55** · 27-02-2009 11:20 AM

> what code is on the housing of your dizzy.

Couldn't find any identification on dizzy.

I have a Hitachi HT04 / D4T94-05 (Distributor King) in my hands and it looks perfect.

Will fit it tonight under the moon light with a gentle breeze blowing....

awwww... what a romantic Friday night....... not.

Nick.