FD/FN2/EP3 Wheel Setup Guide

[LittleDragon^^]

Shouldn't be any issues. A few mates of mine run 17x8.5 +31's all round with 225/45's and I think the other runs 215/45's. Only very slight rubbing under load in the rear on the 225/45 setup, on non rolled guards.

Thanks RPS

[mryangtastic]

Sorry I'm complete noob to wheels.

I'm looking for something for my EP3.
Lowered on RSR Down
215/45/17
Which fits best?
17x7.5 +48
OR
17x8 +45
OR
17x8 +35

[Kreston]

Sorry I'm complete noob to wheels.

I'm looking for something for my EP3.
Lowered on RSR Down
215/45/17
Which fits best?
17x7.5 +48
OR
17x8 +45
OR
17x8 +35

I have 17x7.5 +50 and forever wish it was better.
17x8 +45 will be close to guard but still inside.
17x8 +35 will be perfect.

[mryangtastic]

What's the definition of perfect? I don't want to get my guards rolled.

[mryangtastic]

Looking at CR Kai 17x7 for EP3 lowered on RSR Down springs.
+32, +42, +47.
With no guard modifications, which offset fits the best?

[doosra]

Sorry I'm complete noob to wheels.

I'm looking for something for my EP3.
Lowered on RSR Down
215/45/17
Which fits best?
17x7.5 +48
OR
17x8 +45
OR
17x8 +35

As kreston mention. 17 x 8 +35 is best... I ran those specs and they're perfect fitment. I have a set of Weds sa90 for sale in those specs if u are interested

[charliebrown]

I run 17x8 +35 all round with -1 camber and it looks fukd cos the rear pokes more than the front

If i was to do it again id go 17x8.5 +30 front and 17x8 +35 rear. With either 225 45 all round, or 245/40 front 225 45 rear

[Kreston]

I run 17x8 +35 all round with -1 camber and it looks fukd cos the rear pokes more than the front

If i was to do it again id go 17x8.5 +30 front and 17x8 +35 rear. With either 225 45 all round, or 245/40 front 225 45 rear

Pics?

[Mikeyy168]

Would 17x8.5 with 245/45 front fit ep3?

Edit: forgot to say offset of +40

[eric881104]

Does anyone know if the JDM FD2 Type R Enkei rims would fit on a 2011 FD VTI without any mods?

I think they are 18x7.5 offset is +60.

[Honda_FD]

Does anyone know if the JDM FD2 Type R Enkei rims would fit on a 2011 FD VTI without any mods?

I think they are 18x7.5 offset is +60.

It should. Dont see why it wouldnt

[jprak]

Does anyone know if the JDM FD2 Type R Enkei rims would fit on a 2011 FD VTI without any mods?

I think they are 18x7.5 offset is +60.

Won't fd guards aren't wide enough

Fd2r are wider then the aus spec ones