It's been quite some time since I've done an update and thought it's about time I did since quite a few things have been done.

Firstly I've sorted out all my wiring issues and did a completely wire tuck. Routed the headlight loom and such into the fenders. Stripped out and de-pinned all the plugs I didn't need for the k-swap such as the A/C, heater, blower motor, stereo, clock, side mirror adjusters and a the speakers.

After that when we took off the existing brakes we found that the previous owner had broken off the hard brake line that runs from the prop valve to the rear. So recently acquired one of those for a dc2r wreck, dropped the subframe and changed the lines over. While we took the brakes off we took off all suspension parts, to get new bushings pressed in! Thanks to a fellow clubitr member got a hard race bushing kit for the dc2r and got the front LCAs, front compliance arms, rear lca, rear toe arms and rear trailing arm. Hopefully the car will feel a lot better with brand new bushings!

While I was in the process of doing all this suspension work I thought I may as well finish off the rest since I found great bargain on these... I bought hard race front and rear camber arms AND zeal function x coil overs. These however have not been installed yet but will be soon hopefully!

That's it about this stage as I'm doing this very slowly when I get some spare time! Hopefully will get pictures up of anything I can soon!