Results 1 to 7 of 7
  1. #1

    Hi I have a rattle noisy my CU2 euro , cold start about 40km/h

    it is bit annyoing that when I start the car in the morning or after work

    when I start the car and take off then about 30km to 40 km then I could hear

    the rattle noisy quite badly and then around 60km then it is compeletly gone ..

    so , I assume that is one of the pully noisy but I am not sure is anyone have same

    problem or similar ? please help me it's getting more annoyed

  2. #2
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    any videos of the sound? Check your wheel nuts
    S P A M | W O R K S
    hehe.
    PHC


  3. #3
    no video but I don't think it's sound from wheel nut it's like diesel knocking noisy similar sound//

  4. #4
    Member Array
    Join Date
    Jan 2010
    Location
    PnP Garage
    Car:
    BREEZE
    Either powersteering pulley or belt tensioner

    I had similar symptoms to you, and once I deleted p/s the problem went away
    part time potato

  5. #5
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    could it be the failing VTC mechanism on some cars.
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  6. #6
    CU2 doesn't have p/s it is electric steering and I checked every tensioner ...

  7. #7
    it was a exhaust heat shield noisy .. when rpm goes 2500-3000 then start rattle otherwise it is so quite so , I will fix the problem soon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.