Results 1 to 8 of 8
  1. #1

    Gearbox problems

    Hi guys,

    My car is a 99 vtir Prelude..96Km's on it atm..

    and when shifting from 1st-2nd its kinda hard/notchy..and i can feel the gears as it goes into 2nd..

    i only get this problem sometimes though..and it seems to be mostly when i shift at low rpms (2-3K)..

    when i drive it harder and shift at 5K+ it seems to go in fine..and i dont feel anything when entering 2nd..

    could the problem be my clutch? it has a bit of play at the top of the pedal..like its lil bit loose

    cheers
    chris

  2. #2
    First thing I always ask when knotchy shifting complaints arise..... How long since last g'box fluid change?

    I'd start there if its been a while. Simple yet you'd be surprised how many people over look the nessecity to change tranny fluid.
    DLUG Racing

  3. #3
    hmm i had a similiar prob b4, duno if its exactly what u talkin about though. do u feel a difference when u accelerate?? like it aint smooth?

  4. #4
    Member Array
    Join Date
    Apr 2004
    Location
    Perth
    Car:
    EG Sedan w/JDM ZC
    change the tranny fluid and see how you go. you'd be suprised how much better fresh fluid is.

  5. #5
    Member Array
    Join Date
    Apr 2004
    Location
    Melbourne
    Car:
    EK9
    What kinda gearbox fluid you use? and did u warm up the car enough? and how long you last changed the fluid?

  6. #6
    actually i had the fluid changed around 5K ago

    however, it was changed by my Honda dealer to something other than MTF...they tried a thinner grade oil after i told them what i was experiencing..

    my next servicing is due soon, and i'll be getting them to put in MTF and i'll see how that goes

  7. #7
    Member Array
    Join Date
    Apr 2004
    Location
    Perth
    Car:
    EG Sedan w/JDM ZC
    thinner?? why the hell would they do that. a thicker fluid is going to provide smoother operation. just go back to honda MTF

  8. #8
    Needs more time... Array
    Join Date
    Aug 2003
    Location
    Sydney
    Blog Entries
    12
    Quote Originally Posted by sivic
    thinner?? why the hell would they do that. a thicker fluid is going to provide smoother operation. just go back to honda MTF
    Really...why is that?

    Have a look through this:
    http://www.ozhonda.com/forum/showthread.php?t=22583
    Got a question? Check out the FAQ - http://www.ozhonda.com/go/faq

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.