ED CRX wont fit (USDM EF is same as AUDM ED). I think a buddy of mine ran ED driveshafts and they were too short and the joints would almost pop out at full lock.

EF8/EF9 are basically the same car in terms of engine bay. So the shafts and midshaft are the same.


If you have shafts already and the CV joints are ****ed, I am sure you can used other joints like ED joints. I believe I used a ED inner joint on my EF8s shaft back in the day.


Generally what we found was the EF8/9 is kinda a mix of parts between the DA teg and the ED crx/civic - don't know how much this applies to the shafts though.