Quote Originally Posted by ECU-MAN View Post
Your P3Y ECU is much like our P2K ECU for the D16Y4, so yes you will need a bypass module for those ECU's.

Once the bypass module is installed you must then bypass the starter cut relay by jumping 2 wires.
So.....
Do you provide this bypass module?
Price?
I'd still like to know exactly what the module will do. (I'm inquisitive by nature and like to know how things work.)
Could you also tell me more about the starter-cut relay. where should it be located and is it just a matter of bridging the 2 wires in the connector?


I'm really curious about what it would take to run this little D14 out of the car.
The chassis has rust and I can't get the car approved as roadworthy anymore but the drivetrain is still fine.
I'd like to make a tracked vehicle with the engine and transaxle but would need to know the engine would run.
I know I will need fuel and a battery.. + wiring harness on the engine, probably fuse box in the engine bay and the ECU.
How could I get a hold of the circuitry diagrams for the electrical system?
I could get rid of any unnecessary electrical equipment and only keep the necessities.
Set up a push button start and kill switch.
This could be fun....