Brake pads & rotors part numbers RB1 Odyssey

[blommer]

Hi guys,

Just want to give a heads up on the part numbers of RDA rotors and bendix pads in case anyone needs it.

RDA 7908 - Front Rotors (Same as CRV 2006 on models) EDIT WRONG PART NUMBER Check 1st post for correct Part Number
RDA 7805 - Rear Rotors (Same as CRV 2005 on models) EDIT WRONG PART NUMBER Check 1st post for correct Part Number

DB1393 - Front Pads
DB1847 - Rear Pads

Installed my dimpled rotors and pads and put on the cl9's old 17" AME tracer wheels. Hopefully it looks alright?

[Rage King]

did u install new pads?

how does the braking feel now?

[blommer]

yup went for bendix GCT as they were good for stop start everyday driving, and not harsh on the rotors.

I really think the dimpled & slots are overkill for a slow ass car but overall my braking distance has now decreased. Combination of rotors, pads and brake fluid flush.

On a side note, wife's loving it.

[Rage King]

sounds good mun...

here is what i did to mine (fronts)



helped so much ...considering the overall weight vs speed when stopping!

[Homskie]

Hi guys,

Just want to give a heads up on the part numbers of RDA rotors and bendix pads in case anyone needs it.

RDA 7908 - Front Rotors (Same as CRV 2006 on models)
RDA 7805 - Rear Rotors (Same as CRV 2005 on models)

DB1393 - Front Pads
DB1847 - Rear Pads

Installed my dimpled rotors and pads and put on the cl9's old 17" AME tracer wheels. Hopefully it looks alright?

I know this is an old thread but are you able to give feedback on the above? would you still recommend it?
THanks

[Rage King]

Highly recommended upgrade...

[blommer]

BUMPING an old thread to inform everyone of the incorrect RDA part numbers given to me before.

The CRV front rotors were 3mm thinner than the ODC's and after 2 years of driving, the brake pads have worn down and my brakes were trembling & shuddering every time I pushed the pedal while driving.

So to sum up, ODC rotors are 28mm thick with a min thickness of 26mm, CRV rotors are 25mm thick with min thickness of 23mm. So as expected, I had the CRV rotors on and they were 1mm thinner than the min thickness of ODC's front which explains the shuddering and trembling.

I have now updated the first post with the correct part numbers.