4x100 to 5x114.3

[Lukey]

hey guise

heard somewhere that going from 4x100 to 5x114.3 increases track width slightly, cant seem to find any info and am trying to confirm

thanks

car is dc4 btw

[Daveho1]

Really is going to depend on the wheels u end up with

[Lukey]

Really is going to depend on the wheels u end up with

disregarding wheels is what i meant, i heard it increases track width.

so if you run same width and offset wheels with same size tyre the 5x114.3 will sit slightly out more/wider than the 4x100

[SHOGUNOVDDRK]

Lukey, welcome to the dark side.. go hard son.
Oxer was the one whom encountered this issue.

IIRC it was approximately 10mm increase with the set up he went with.

[Lukey]

Lukey, welcome to the dark side.. go hard son.
Oxer was the one whom encountered this issue.

IIRC it was approximately 10mm increase with the set up he went with.

lloyd! long time no talk chief

i thought it was ox, wasnt sure tho. 10mm per side, dang thats a fair bit. i might text him and ask what stuff he used

i plan on getting some knuckles shortened by a mate of mine so thought id investigate 5 stud swap. but if its gonna add 10mm per side i wont bother as im planning to eventually get some 8.5" wide wheels under it

[SHOGUNOVDDRK]

lloyd! long time no talk chief

i thought it was ox, wasnt sure tho. 10mm per side, dang thats a fair bit. i might text him and ask what stuff he used

i plan on getting some knuckles shortened by a mate of mine so thought id investigate 5 stud swap. but if its gonna add 10mm per side i wont bother as im planning to eventually get some 8.5" wide wheels under it

Hehe I'll be back chief.

Your thoughts were right and it was discussed briefly in his thread on Spam|Works.

Ukley I'd ruv to see you fi stunnin, do it lad!
In4gtrwheelfitment

[Lukey]

Hehe I'll be back chief.

Your thoughts were right and it was discussed briefly in his thread on Spam|Works.

Ukley I'd ruv to see you fi stunnin, do it lad!
In4gtrwheelfitment

if it increases track width at all im not gonna do it lol

[Lukey]

spoke to ox, he said it increased track width 12mm per side.

might investigate 4x114.3

[Renaissance_x]

Or a willwood brake kit.

[Lukey]

Or a willwood brake kit.

why??

[u mad?]

why??

Why do you want to go to 5 stud?

[cbauto]

increase 10mm toTAL.

stock offset of 4x100 vtir is +45
Stock offset of dc2r is +50

they increased 5mm per side to compensate for the track increase of 10mm

AFAIK reading on the net.