Well may be about a year pass since last update.
due some change in circumstances (Life) this has been put on the back burner while other things are going on. BUT Yes this Project is still going and finishing it is not clear in sight yet LOL!

I have finish mocking up the rear subframe to mounts the engine up and i have sent it to a fabies to make a new tubular frame. Which would be alot better than my hack / mock up frame.

Subframes now has been jigged up





A few tubes is tagged




this should be done for test fitting in the next week or two.
I have the frames dropped last year November, and fabricators has taken his own sweet time to fab it up! although i did tell him no "rush".

The imported panels and body parts are now painted, just awaiting for the frames to be done so i could roll up the car and get the body re-painted.





Well, "THAT" circumstance that change resulted in selling the EG race car.
So i took the motor out from it and replace with my UKDM EP3 motor and sold the EG with that.

So the beat now will rock my race car engine and box.
JDM k20, 5.1, 1.5 spoon lsd, BC Cams, Skunk2 I/m,K-Pro, I/H/E blah blah blah
was tune to 242hp (hub)

so either i become a hero or potatoed my self when driving *touch wood.






Finaly got my self, extra gimmicky carpet from jap land.
the OEM Zebra carpet =p



Will keep you guys posted with the build "iF" i got anything to update.. at this pace - 6 months at a time?

hahaha!