Does any one have pinout for CL9 Dash Cluster (30 pin)

[bmgjet]

Hello,
Im working on a project where Iv got an adapter that takes OBD1 datalogging protocol and converts it to CAN.
Iv got it working on the Bench with GM dash since all there protocol and pin outs are easily found, My next step is to support Honda Dashes (S2K, CL7 and CL9.)
Does any one have the pinout for the CL9 dash?
I found one on google but its incorrect since colours dont line up and quick check with multi-meter shows its wrong with its earth and power pins.

Thanks.

[bmgjet]

For any one looking up this info in the future.

Looking into plug from top of dash guages at you.
1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9,10,11,12,13,14,15,
30,29,28,27,26,25,24,23,22,21,20,19,18,17,16


Pin5 12V
Pin 24/25 Earth
Pin21 CAN H
Pin22 CAN L

500kbps baud rate CAN.
Dash output CAN IDs
CAN ID 500
CAN ID 212

[Fredoops]

theres 2 plugs for the Accord Euro cluster tho

prefacelift and facelift used different plugs for some reason.