Page 2 of 7 FirstFirst 12345 ... LastLast
Results 13 to 24 of 83
  1. #13
    Member Array
    Join Date
    Sep 2003
    Location
    Melbourne
    Car:
    '94 CRX
    wha'ts a TODA crate engine and how much do they cost ? =)

    -2ds

  2. #14
    Array
    Join Date
    Aug 2003
    Location
    Unit 5/15 Sefton Rd, Thor
    Car:
    08 Red CU2 Euro
    Quote Originally Posted by 2ds
    wha'ts a TODA crate engine and how much do they cost ? =)

    -2ds
    A built to order engine, assembled to meet the end user's requirement.
    Obviously this varies from end user to end user...
    As such so too does the price...
    TODA Performance Australia Pty Ltd
    TODA Racing - FIGHTEX - MFactory - HALTECH - EXEDY
    Race engines, Dyno tuning, Licenced workshop, Parts.
    P:0401869524 email: toda@todaracing.com.au

  3. #15
    just a matter of curiosity, but if I had asked for this setup in Toda parts, could u give me an idea of the price i would need to pay?

    Stock supplied B18c7 motor

    12to1 CR overbored to 86mm forged pistons
    Shotpeened, lightened forge rods
    Knife edged, lightened and balanced crank (micro polished)
    Toda spec c Cams
    1m oversized Titanium Valves (3 angle job), springs, retainers
    overbored port and polished head and exhaust ports.
    bored out TB by 3 mm
    short ram intake pipe
    length tuned extractors
    hi flow cat, and stuiable exhaust (2 1/4 exhaust)
    items like thermostat, oil coolers, and other supplementary items to support the above setup.

    just an idea of how much id be spending would be nice, and the sort of power gain that u might see from such a setup

  4. #16
    Newcomer Array
    Join Date
    Feb 2004
    Location
    Scotland, UK
    Car:
    EG6 VTi
    I found this link for a 12 second all motor eg hatch

    Spec Sheet

  5. #17
    Array
    Join Date
    Aug 2003
    Location
    Unit 5/15 Sefton Rd, Thor
    Car:
    08 Red CU2 Euro
    pornstar –
    I’m not being mean or rude here… This is straight up…
    Don’t confuse a perceivably cool “set-up”, with an actual engine requirement.
    A requirement infers there is an actual end application.
    This means the engine is built to achieve a specific purpose or purposes…
    In that, you need to answer this question… What’s it for?
    Is it a circuit engine? If so what type? Endurance, sprint, Gymkhana, drift etc…
    Is it class or regulation specific? Fuel type?
    Perhaps the application is drag racing… Or perhaps it is to be multi purpose…
    Other questions that need to be answered include…
    Is engine longlivety a priority?
    Is winning also a priority?
    Not how much does it cost… but… What is your budget?
    In any case, I did say email me if you want one…
    TODA Performance Australia Pty Ltd
    TODA Racing - FIGHTEX - MFactory - HALTECH - EXEDY
    Race engines, Dyno tuning, Licenced workshop, Parts.
    P:0401869524 email: toda@todaracing.com.au

  6. #18
    Quote Originally Posted by snowman95
    ok, let me rephrase, if you were aiming for a mid to low 13 second car all motor, with the mods ive listed and engine management/tuning etc what other engine hardware would i need to be looking at
    Ok now that I read this post what you are after is 13sec N/A Honda streetcar.If you give me an idea of what chassis you have somone should be able to answer your question of an engine combo,as Adrain has explained we need more info to help you out.
    Regards Dyno Dave
    Buddyclub Australia
    Member of Master Of Vtec Group

  7. #19
    i think it shld read...

    turbo is the cheaper option to get more power

  8. #20
    Quote Originally Posted by DynoDave
    Quote Originally Posted by snowman95
    ok, let me rephrase, if you were aiming for a mid to low 13 second car all motor, with the mods ive listed and engine management/tuning etc what other engine hardware would i need to be looking at
    Ok now that I read this post what you are after is 13sec N/A Honda streetcar.If you give me an idea of what chassis you have somone should be able to answer your question of an engine combo,as Adrain has explained we need more info to help you out.
    Regards Dyno Dave
    DC2 1995 VTI-R Honda Integra, is that what you mean by Chassis?

  9. #21
    Now that we know what type of base chassis you have what other mods have you done to your car as I do not want to rave on about this and that to find out you already have some of the parts you need.
    Regards Dyno Dave
    Buddyclub Australia
    Member of Master Of Vtec Group

  10. #22
    Quote Originally Posted by DynoDave
    Now that we know what type of base chassis you have what other mods have you done to your car as I do not want to rave on about this and that to find out you already have some of the parts you need.
    Regards Dyno Dave
    from my original post

    Ive got a 95 Integra Vtir:

    Short ram intake, k&n pod filter
    4-2-1 5zigen Headers
    Hi flow cat custom 2.5
    2.5 full exhaust prof vrs cs cat back
    16 inch light weight racing rims

  11. #23
    Member Array
    Join Date
    Sep 2003
    Location
    Melbourne
    Car:
    EG
    i can tell you that thats well ova 8 grand of mods not including the mota

  12. #24
    well my budget is 10k

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.