Anyone got the technical and how to do it yourself ? If so let me know. been searching online can't find the gap clearance from factory. Also can someone tell me how to do it on single cam.
dude search harder the answer is out there http://www.ozhonda.com/forum/showthr...ht=tappets+DIY http://b16a2.kicks-ass.net/automotiv...tech_guide.htm 1993 Breeze V.I.N: JHMEG331 Engine: D13B2 Valve clearances (cold) Inlet 0.18 - 0.22mm Exhaust 0.23 - 0.27mm at valve
Last edited by ECU-MAN; 14-09-2005 at 11:22 PM.
you guys are life saver thx man. ya did not search for tappets adjustment man . thx alot fot the info ECU MAN.
ecu man if ur reading just curious valve clrance can be anything in between the figure given or ie inlet .18-.22 mm?
yes, I like to do them in the middle, more to tight side of things say for inlet .19 or .20
kool ya i have done my car it runs much better flat spot gone
just a bump for the other trend regarding valve clarence .
Originally Posted by ECU-MAN dude search harder the answer is out there http://www.ozhonda.com/forum/showthr...ht=tappets+DIY http://b16a2.kicks-ass.net/automotiv...tech_guide.htm 1993 Breeze V.I.N: JHMEG331 Engine: D13B2 Valve clearances (cold) Inlet 0.18 - 0.22mm Exhaust 0.23 - 0.27mm at valve Wat about a 93 Integra Vti-R?
Forum Rules
Reply With Quote
the answer is out there
Originally Posted by ECU-MAN
Bookmarks