Radius rods are not in the same catagory as a traction bar so you cannot really compare them.

Stock radius rods on the integra are not very well designed, and under hard launching or accelerating can bind, causing wheel hop. A nice traction bar (which usually replaces your stock front cross-member) solves this problem by using a 'perfect' radius rod design.

Maybe you have crap tyres.... But if you are getting this just from accelerating from 2k onwards, then there is some big problems going on, probably your mounts, because though you have a type-r head, you don't have any more torque down low than a normal LS, and I certainly don't have issues when I go WOT from 2000...

You do not have too much power, or a 13 second car, but there is plenty of potential there.

Saddly, motor mount inserts are pretty crappy, and will do the job, but won't last for ever.

Even more saddly, it is damn hard to find full mounts for the DA.

www.full-race.com for all your traction bar needs