[Melb] Need Info on Integra front panels

**danni_d** · 12-10-2005 07:37 PM

hi.. i was wondering about.. if u change the front panels of a 93 integra vti-r to the JDM front panels... would it be a straight fit.. or would it cost much more for fitting it on.?

**Spunkymonkey** · 12-10-2005 07:40 PM

Originally Posted by danni_d

hi.. i was wondering about.. if u change the front panels of a 93 integra vti-r to the JDM front panels... would it be a straight fit.. or would it cost much more for fitting it on.?

as in front bar/headlights?

no....different headlights totally....you'd have to find out how much conversion costs.

**tRipitaka** · 12-10-2005 07:41 PM

u'll need, fenders, radiator support, bonnet headlights and front bar..
you need to snap off the existing support and weld on the new one.. then it's pretty much bolt on from there..

**kenshin** · 12-10-2005 07:42 PM

you'll need the radiator mount to be welded on...

i've heard of people who have modded the jdm kit to fit in usd/ausdm tegs but havent actually seen any pics or a guide...

**vteccoupe** · 12-10-2005 07:44 PM

Originally Posted by danni_d

hi.. i was wondering about.. if u change the front panels of a 93 integra vti-r to the JDM front panels... would it be a straight fit.. or would it cost much more for fitting it on.?

u need to basically change the whole of the vtir front exterior...frm the bonnet to the side front panels to the headlight to the front bumper..
for the full exterior jdm conversion shld b around 2k nt including labour

**danni_d** · 12-10-2005 07:48 PM

Originally Posted by vteccoupe

u need to basically change the whole of the vtir front exterior...frm the bonnet to the side front panels to the headlight to the front bumper..
for the full exterior jdm conversion shld b around 2k nt including labour

yes i know that i have to get the side panels, front bar and headlights.. but like i'm just saying if it would be a straight fit?

**tRipitaka** · 12-10-2005 07:49 PM

Originally Posted by tRipitaka

you need to snap off the existing support and weld on the new one.. then it's pretty much bolt on from there..

**danni_d** · 12-10-2005 07:49 PM

thanks dude

**DC5R8** · 12-10-2005 07:55 PM

cost about 100 bucks

**quangsta** · 12-10-2005 09:28 PM

Originally Posted by DC5R8

cost about 100 bucks

wtf??....100 bux???...prolli only get the radiator support and labour to weld it on...

sighz...better not b a post count thingy....

**danni_d** · 12-10-2005 09:58 PM

haha.. he was talking about the radiator support and the labour anyway.. not the whole front jdm panels fitted on as well.

**eG_YoDa** · 13-10-2005 04:13 AM

i have in my possession a pair of front JDM teg fenders
not in all the best condition i must say ( needs to be fixed BADDDDD )
willing to let em go for bugger all if ur interested
pm me