Page 1 of 2 12 LastLast
Results 1 to 12 of 14
  1. #1

    Honda's only have 3 engine mounts?

    How come Honda's only have 3 engine mounts?

    They don't have an engine mount right in front of the engine like other FWD cars??

    Is it by any chance due to the engine rotating in a different direction to normal?

  2. #2
    Member Array
    Join Date
    Sep 2005
    Location
    Perth
    Car:
    90 Integra LS
    thers only 3 coz they knew that all the honda ppl would be pissed off with the cars wiht this shit engines in and they knew we would wanna do an engine swap, so they made it easy for us
    The Pain Of Discipline Is Far Less Than The Pain Of Regret

  3. #3
    Account Disabled Array
    Join Date
    Aug 2005
    Location
    hunter region
    Car:
    EF8: i call her EFFY
    yes our motors are compared to most cars on the other side of the engine bay the right! Most other companies have there motors on the left. Also there are hondas with more than 3 engine mounts

  4. #4
    thers only 3 coz they knew that all the honda ppl would be pissed off with the cars wiht this shit engines in and they knew we would wanna do an engine swap, so they made it easy for us [img]images/smilies/wink.gif[/img]
    hardly a technical response man...this is the "technical " discussion for serious chit-chat thanks

    Anyway , not all hondas come with 3 engine mounts - my honda civic has 5...and earlier civics came with another front mount too -

  5. #5
    Needs more time... Array
    Join Date
    Aug 2003
    Location
    Sydney
    Blog Entries
    12
    Prelude has the mount at the front that you talk of too.

    There are 5 mounts on 'most' EG/EK civic and DC integras.

    Two on the timing belt side (upper and lower), Two on the transmission (upper and lower) and one (tortion) mount at the rear.
    Got a question? Check out the FAQ - http://www.ozhonda.com/go/faq

  6. #6
    the *reason* you may not have noticed the 'front' mount some other FWD cars *may* have is so in the case of a front ender - the mount has less chance to damage the engien,

    just FYI - my 98 integra has 5 engine mounts, (as do all from 94-01)

    also FYI - my LS Integra had a front mount (89-92)
    B20VTEC - since 2002

  7. #7
    Account Disabled Array
    Join Date
    Aug 2005
    Location
    hunter region
    Car:
    EF8: i call her EFFY
    my SiR has 5 from what i counted when i replaced my oil oil filter and the sump plug

  8. #8
    Member Array
    Join Date
    Aug 2004
    Location
    Brisbane
    Car:
    Del Sol
    Mine has 5 too...

  9. #9
    How come they don't have the front ones though

    My car (lancer) has 4 that I can see, and one of them is at the front, as I have like I beam from the crossmember that goes to the front of the car

    I thought it was odd that my friends Civic EG didn't have this?

  10. #10
    Quote Originally Posted by tinkerbell
    is so in the case of a front ender - the mount has less chance to damage the engine,
    B20VTEC - since 2002

  11. #11
    Member Array
    Join Date
    Feb 2004
    Location
    Brisbane
    Car:
    Honda's
    mine EG hatch only has 3....(hasport mounts-h22a..) hehehe

  12. #12
    Member Array
    Join Date
    Sep 2005
    Location
    Northern NSW
    Car:
    Had a 1990 ED Civic
    Due to the inertial forces of the engine, when looking at the timing belt cover, under load the engine will rock in a clockwise motion, hence putting strain on the engine mount at the back. This mount stops the intake manifold from hitting the firewall.

    As most other FWD non-Honda's have the engine on the Drivers side, they require an engine mount(actually refered to as an engine steady) to stop the exhaust manifold from hitting the radiator/radiator fans(which would get messy)

    So for all of you that have 5 mounts, the question relates to the absence of an engine mount between your radiator and gearbox. I know my ED Civic has one but as Honda spent a lot of time making better engine mounts, this mount has been made redundant.
    Does anyone know how many mounts are on a DC5 Integra??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.