Results 1 to 6 of 6
  1. #1

    Removing Dash problems need help...

    Hey Guys,

    Having dramas trying to remove and fit my dash.. as you can see in the pics i have taken the screws out where the red arrows point, but having trouble trying to detach the dash from the yellow line and to the left where the green arrows lie, perhaps i have missed another screw some where??


    <img src="http://i2.photobucket.com/albums/y23/anthonyket/DSC00002.jpg" alt="Image hosted by Photobucket.com">
    http://i2.photobucket.com/albums/y23...t/DSC00002.jpg

    Can any assist, its a 1996 Honda Accord Exi

    Cheers

  2. #2
    Noob crowd controller Array
    Join Date
    Sep 2004
    Car:
    Civic
    While this is for an earlier accord, it may be of some use:

    http://www.honda.co.uk/owner/AccordManual/400/14-51.pdf

    also check out:
    http://www.honda.co.uk/owner/AccordManual/
    See a good post? Give it a PQ point.


    Quote Originally Posted by ludecrs View Post
    They have the depreciation re-sale value of a burnt out and multi-rolled Commodore.

  3. #3
    Thanks for that the '96 is slightly different but i might try and pry the air vents off on the left hand side and look for srews in there....

    Any other suggestions and directions would be great

  4. #4
    Well i tried the vents and they dont detach.. any other ideas?? would be great@!
    Cheers

  5. #5
    Needs more time... Array
    Join Date
    Aug 2003
    Location
    Sydney
    Blog Entries
    12
    Moved to the Accord forum.

    Please post in the correct forum next time.
    Got a question? Check out the FAQ - http://www.ozhonda.com/go/faq

  6. #6
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    - remove your center consol, two screws in the compartment, one under the cup holder
    - remove the shifter facia, MT remove the gearknob, two screws at the end of the facia ( where the center consol was ) remove the screw under the ash tray. Lift out the facia.

    - remove the two screws from under inside the dash area


    look up in there where the two red arrows are, roughly where the two circles are. youl see the screws. then gently pull out the dash.

    you will need to undo the heater cable as well.

    carefull as I have seen these things crack when pulled to harshly

    good luck


    Last edited by ECU-MAN; 05-11-2005 at 10:48 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.