What injectors

[heist]

What injectors directly fit into a D16a8?

Prelude? Integra?

[tinkerbell]

i think they all do...

[anna1984]

just go to a good car tuning workshop and they'll have exactly what will fit

[tinkerbell]

just go to a good car tuning workshop and they'll have exactly what will fit

huh?

this is almost as useful as "try the yellow pages"

[saxman]

you're not going to find an oem honda injector that will flow enough to properly support a forced induction set up on a honda anyway... so there's no reason asking...

they should all fit though... infact, all the d series and b series injectors should be the same(well, at least the obd1 d series... I don't know for sure about the obd0 ones)... they all flow 240cc's... the prelude ones flow an amazing 310cc... which is about 130cc less than what I would consider the smallest injector I would run on a turbo honda

[heist]

well what other type of injector will fit? vr4 ones from an evo?

[flipmods]

They will all fit but since some flow more than others you will need to retune when you put the new ones in or else your cut will run rich and go slower than stock

[pornstar]

heist im due in sydney again later this week. I can bring ya a set of rc injectors that will drop right in if need be mate. let me know and shoot me a pm

[saxman]

well what other type of injector will fit? vr4 ones from an evo?

I use 450cc injectors out of a mitsubishi eclipse... they take some minor modification of the seals and some wiring to get them to work, but nothing too crazy... I don't know if the vr4 ones are the same or not... we never got the evo and the eclipse here at the same time.

I would pick up a set from tunertoys.com personally

[poid]

VR4 are the same as eclipse/DSM