Page 2 of 2 FirstFirst 12
Results 13 to 17 of 17
  1. #13
    Member Array
    Join Date
    Dec 2005
    Location
    CL9 Euro 6MT
    Car:
    Sydney
    PCV? My ZC is eating oil as well despite a slow CAM seal oil leak, a DIY would be awesome.

    cheerz.

  2. #14
    Quote Originally Posted by EuroDude
    PCV? My ZC is eating oil as well despite a slow CAM seal oil leak, a DIY would be awesome.

    cheerz.
    dude - check the DIY section..."Wynode" did a write up for the camseal replacement ( and i did a DIY for other upper gaskets too)

    Chi i should be free wednesday/thursday - lets keep it to MSN la

  3. #15
    Member Array
    Join Date
    Aug 2004
    Location
    Melb
    Car:
    '94 VTiR Teg
    stop worrying about where its gone and fill her up!

  4. #16
    Member Array
    Join Date
    Jan 2006
    Location
    Colorado, U.S.A.
    How bout you also get a compression check before you go out and buy a bunch of parts. Figure out the problem first then fix it. If the rings are bad on the pistons why buy a pcv valve?! The pcv valve actually costs more then a new set of rings... Although it takes a bit more to change the rings!!

  5. #17
    Member Array
    Join Date
    Dec 2005
    Location
    CL9 Euro 6MT
    Car:
    Sydney
    Quote Originally Posted by bennjamin
    dude - check the DIY section..."Wynode" did a write up for the camseal replacement ( and i did a DIY for other upper gaskets too)
    Cheers, ill have a look.


    btw I figured having a small oil leak can be a positive thing since the oil is always being topped up, lessening the need for an oil change every 5000km. Unless its a major oil leak off course.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.